View DCMZXXXXXX197_7806169.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

dimensions are shown in mm (inch) dimensions subject to change 2 d* - wrap post termination see pages 12-13. product features high performance commercial class connectors two contact lengths for 2 or 3 wraps machined contacts d* straight connectors are available for high performance uses according to din 41652. contacts available in two popular lengths. zd* - straight solder termination (stamped) see pages 8-9. product features stamped contacts with 5 a current capacity economical optional vertical standoffs with optional harpoon style boardlocks or screw locks zd* straight connectors are available for applications where price is the primary driver. they are available with or without boardlocks and screw locks. d subminiature straight pcb selection guide d*ng - straight pressfit termination the d*ng is based upon the specification cecc75-301-802. these connectors provide a low-cost alternative to traditional through hole solder contacts. utilizing stamped ??eye of the needle?? compliant contact tails per iec-352-5, the parts are quickly and easily mounted onto pcbs without soldering, crimping or specialized tooling. the socket contact engaging area utilizes a ??spoon?? shape with four points of interconnection. hardware options provide flexibility and ensure that the final product fits the electrical requirements of any application. product features quick and easy press-in installation without specialized tooling ??spoon?? socket contact provides improved interface compared to ??tuning fork?? closed-entry socket for secure blind mating front-shell only design based on cecc 75-301-802 ??eye of the needle?? compliant contact tails press-in bolt for ground continuity #4-40 unc and m3 hardware options see pages 4-5. d*m straight solder termination (machined) ? standard pc tails see pages 6-7. product features 7.5 a current capacity machined contacts 2 contact finishes optional vertical standoffs, screw locks, and boardlocks (4 prongs) ul file number e8572 dimensionally compatible with combo d ? d*m straight pcb connectors, equivalent to mil-c-24308 qualified versions (except for finishes) for printed circuit boards and backplanes in demanding applications. additional contact lengths, hardware and finish options available; consult factory for details. d* - straight solder termination (machined) ? european pc tails see pages 10-11. product features high performance commercial connectors two contact finish performance classes optional vertical standoffs, threaded inserts and pushfits/boardlocks ol2 contact length, other lengths available tin plated contact pc tails (pin & socket) machined contacts d* straight connectors are available for high performance uses according to din 41652. available with european length ol contacts. select contact finish from 2 performance classes.
dimensions are shown in mm (inch) dimensions subject to change 3 materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: dark green) contact socket: copper alloy gold over nickel. terminating end tin (socket) hardware steel/copper alloy tin/zinc specifications temperature rating ? 55 c to 125 c current rating 5 a contact resistance 10 m dielectric withstanding voltage 1250 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94-0 none (color: black) contacts copper alloy gold over nickel hardware steel/copper alloy tin/zinc specifications temperature rating ? 55 c to 105 c current rating 5 a contact resistance 15 m dielectric withstanding voltage 1000 vac at sea level d subminiature straight pcb selection guide specifications current rating 5 a / 25 c, 3.5 a / 70 c ambient temperature rating ? 55 c to 125 c contact resistance 10 m test voltage 1200 vrms at sea level x plated through hole 1,09 - 0,94 (.043 - .037) pc tail press-in force 100n/contact max. pc tail push-out force 30n/contact min. pc board thickness 3,20 - 1,60 (.125 - .062) materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: black) contact copper alloy gold over nickel (standard) or gold over pdni (-408) hardware steel/copper alloy tin/zinc materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: dark green) contact copper alloy gold over nickel. terminating end tin (socket only) hardware steel/copper alloy tin/zinc specifications temperature rating ? 55 c to 125 c current rating 7.5 a contact resistance 55 millivolt max at 7.5 a test current dielectric withstanding voltage 1000 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: dark green) contacts copper alloy gold over nickel in mating area, tin on balance hardware steel/copper alloy tin/zinc specifications temperature rating ? 55 c to 125 c current rating 5 a contact resistance 10 m dielectric withstanding voltage 1250 vac at sea level
dimensions are shown in mm (inch) dimensions subject to change 6 d subminiature d*m straight solder termination (machined) ? standard pc tails dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) part numbers shell size layout standoff standoff & boardlock standoff, boardlock & screw lock de 9 demv9pnk87 demz9pnk87 demn9pnk87 da 15 damv15pnk87 damz15pnk87 damn15pnk87 db 25 dbmv25pnk87 dbmz25pnk87 dbmn25pnk87 dc 37 dcmv37pnk87 dcmz37pnk87 dcmn37pnk87 dd 50 ddmv50pnk87 ddmz50pnk87 ddmn50pnk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: demn9pnk127 plug l 5,69 (.224) 2,84 (.112) f w 2,84 (.112) engaging face hardware removed for clarity hardware removed for clarity dd configuration selection guide for product features, specifications, materials and finishes, see pages 2-3. reader?s resource for contact cavity arrangements, see page 224. for p.c. hole patterns, see page 274. for panel cutouts, see page 221. for hardware views (standard), see page 226. a c b e d 10 position 1 0,76 (.030) 2,92 (.115) 6,50 0,25 (.256 .010) screw lock # 4-40 unc boardlock 4,52 (.178) 7,62 0,25 (.300 .010) standoff # 4-40 unc
dimensions are shown in mm (inch) dimensions subject to change 7 d subminiature d*m straight solder termination (machined) standard pc tails part numbers shell size layout standoff standoff & boardlock standoff, boardlock & screw lock de 9 demv9sna197 demz9sna197 demn9sna197 da 15 damv15sna197 damz15sna197 damn15sna197 db 25 dbmv25sna197 dbmz25sna197 dbmn25sna197 dc 37 dcmv37sna197 dcmz37sna197 dcmn37sna197 dd 50 ddmv50sna197 ddmz50sna197 ddmn50sna197 note: for contacts with 30 microinches gold substitute k126 for a197. example: demn9snk126 dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle l 5,69 (.224) 2,84 (.112) f w 2,84 (.112) engaging face hardware removed for clarity hardware removed for clarity dd configuration selection guide for product features, specifications, materials and finishes, see pages 2-3. readers resource for contact cavity arrangements, see page 224. for p.c. hole patterns, see page 274. for panel cutouts, see page 221. for hardware views (standard), see page 226. a c b e d 10 position 1 0,76 (.030) 2,92 (.115) 6,50 0,25 (.256 .010) boardlock 7,62 0,25 (.300 .010) screw lock # 4-40 unc 4,52 (.178) standoff # 4-40 unc
dimensions are shown in mm (inch) dimensions subject to change 14 d subminiature 90 pcb selection guide d*m ? 90 solder termination (machined) ? standard footprint .318 or .283 inch d*m 90 pcb connectors, equivalent to mil-c-24308 qualified versions (except for finishes), for use with printed circuit boards in demanding applications. additional contact lengths, hardware and finish options available; consult factory for details. product features 7.5 a current capacity machined contacts two contact finishes metal bracket with threaded insert standard optional screw locks and boardlocks ul file number e8572 dimensionally compatible with combo d ? zed* ? 90 solder termination (stamped) ? standard footprint .318 inch zed* 90 connectors are available for applications where price is the primary driver. they are available with integrated plastic brackets with standard footprints. product features stamped contacts with 5 a current capacity economical plastic bracket with integrated boardlocks and grounding strap optional screw locks zd* ? 90 solder termination (stamped) ? european footprint 10,2 mm zd* 90 connectors are available for applications where price is the primary driver. they are available with integrated plastic brackets with european footprints. product features stamped contacts with 5 a current capacity economical plastic bracket with integrated boardlocks and grounding strap optional screw locks d* ? 90 solder termination (machined) ? european footprint 10,2 or 9,4 mm d* 90 connectors are available for high performance uses according to din 41652. available with european footprint 1aon contacts, plastic and metal brackets, #4-40 or m3 threads and stamped pushfits/boardlocks. contact finish available in 2 performance classes. product features high performance commercial class connectors two contact performance classes optional metal and plastic brackets, threaded standoffs, clinch nuts, and stamped pushfits/ boardlocks tin plated contact pc tails (pin & socket) see pages 16-17. see pages 18-19. see pages 20-27. see pages 28-29. connector footprint measured from the front shell. connector footprint measured from the rear shell.
dimensions are shown in mm (inch) dimensions subject to change 15 d subminiature 90 pcb selection guide specifications temperature rating ? 55 c to 125 c current rating 7.5 a contact resistance 55 millivolt max. at 7.5 a test current dielectric withstanding voltage 1000 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: dark green) pin contact copper alloy gold over nickel socket contact copper alloy gold over nickel in mating area, tin on balance hardware (except boardlocks) steel tin boardlocks copper alloy tin specifications temperature rating ? 55 c to 105 c current rating 5 a contact resistance 15 m dielectric withstanding voltage 1000 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none contacts copper alloy gold over nickel in mating area, tin on balance specifications temperature rating ? 55 c to 105 c current rating 5 a contact resistance 15 m dielectric withstanding voltage 1000 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none contacts copper alloy gold over nickel in mating area, tin on balance specifications temperature rating ? 55 c to + 125 c current rating 5 a contact resistance 10 m dielectric withstanding voltage 1250 vac at sea level materials and finishes description material finish shell steel tin insulator thermoplastic, ul 94v-0 none (color: dark green) contacts copper alloy gold over nickel in mating area, tin on balance hardware steel or plastic tin or none boardlocks copper alloy tin
dimensions are shown in mm (inch) dimensions subject to change 16 d subminiature d*m 90 solder termination (machined) ? standard footprint .318 or .283 inch part numbers shell size layout bracket bracket & boardlock bracket & screw lock #4-40 unc bracket, boardlock & screw lock #4-40 unc de 9 demp9pjk87 demcp9pjk87 demd9pjk87 demg9pjk87 da 15 damp15pjk87 damc15pjk87 damd15pjk87 damg15pjk87 db 25 dbmp25pjk87 dbmc25pjk87 dbmd25pjk87 dbmg25pjk87 dc 37 dcmp37pjk87 dcmc37pjk87 dcmd37pjk87 dcmg37pjk87 dd 50 ddmp50pjk87 ddmc50pjk87 ddmd50pjk87 ddmg50pjk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: damg15pjk127 dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) m 0,25 (.010) n 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) 12,34 (.486) 8,64 (.340) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) 12,34 (.486) 8,64 (.340) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) 12,34 (.486) 8,64 (.340) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) 13,74 (.541) 10,06 (.396) connector footprint measured from the front shell. connector footprint measured from the rear shell. plug engaging face screw lock and boardlock removed for clarity screw lock and boardlock removed for clarity dd configuration selection guide for product features, specifications, materials and finishes, see pages 14-15. reader?s resource for contact cavity arrangements, see page 224. for p.c. hole patterns, see page 272. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration. see reader?s resource page 226. 10 a c e d b boardlock 0,76 (.030) 2,92 (.115) rivnut #4-40 unc 6,50 0,25 (.256 .010) m n screw lock #4-40 unc bracket, metal 5,68 (.224) 2,84 (.112) 7,18 0,25 (.283 .010) 4,33 0,38 (.170 .015) l 4,33 0,38 (.170 .015) 2,84 (.112) 7,18 0,25 (.283 .010) w f
dimensions are shown in mm (inch) dimensions subject to change 17 d subminiature d*m 90 solder termination (machined) ? standard footprint .318 or .283 inch part numbers shell size layout bracket bracket & boardlock bracket & screw lock #4-40 unc bracket, boardlock & screw lock #4-40 unc de 9 demp9sja197 demc9sja197 demd9sja197 demg9sja197 da 15 damp15sja197 damc15sja197 damd15sja197 damg15sja197 db 25 dbmp25sja197 dbmc25sja197 dbmd25sja197 dbmg25sja197 dc 37 dcmp37sja197 dcmc37sja197 dcmd37sja197 dcmg37sja197 dd 50 ddmp50sja197 ddmc50sja197 ddmd50sja197 ddmg50sja197 note: for contacts with 30 microinches gold substitute k126 for a197. example: damg15sjk126 dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) m 0,25 (.010) n 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) 12,34 (.486) 8,64 (.340) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) 13,74 (.541) 10,06 (.396) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face screw lock and boardlock removed for clarity screw lock and boardlock removed for clarity boardlock a c b d e 0,76 (.030) 10 2,92 (.115) note: dimension varies with alternate bracket configuration. see reader?s resource page 226. selection guide for product features, specifications, materials and finishes, see pages 14-15. reader?s resource for contact cavity arrangements, see page 224. for p.c. hole patterns, see page 272. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. 6,50 0,25 (.256 .010) m n rivnut #4-40 unc screw lock #4-40 unc bracket, metal 5,68 (.224) 7,18 0,25 (.283 .010) 4,33 0,38 (.170 .015) 2,84 (.112) l 7,18 0,25 (.283 .010) 4,33 0,38 (.170 .015) 2,84 (.112) f w dd configuration
dimensions are shown in mm (inch) dimensions subject to change 43 d subminiature combo d ? c ombination d subminiature connectors offer the advantages of an industry standard shield i/o interconnect, with the flexibility of a customized special, designed for any application. this connector system is ideal for applications that require optimization of space while improving overall shielding. combo d ? accomplishes this by combining multiple interconnect types into one fully shielded product, decreasing the number i/o interfaces and reducing the possibility of emi/rfi leakage. by continually investing in engineering and manufacturing technology, itt cannon has improved the performance and features of this popular product. this catalog contains our latest efforts to meet the global requirements of the commercial electronics industry with a flexible, reliable and cost effective connector solution. applications video coaxial transmission (75 ) rf and telecom transmission (50 ) power interconnects (up to 40 a) product features standard and european footprints pre-installed 75 /50 coaxial or high power contacts (one part number) vertical standoffs or 90 brackets 90 or straight pcb pc boards up to 3,2 (.125) thick pcb variants available with boardlocks and/or screw locks (#4-40 or m3) materials and finishes connector assembly description material finish/treatment shell steel tin insulator black polyester, ul 94v-0 none pin contact copper alloy gold over nickel socket contact copper alloy gold over nickel in mating area, tin on balance standoff stainless steel passivated bracket steel tin rivnut steel tin boardlock copper alloy tin coaxial/high power/high voltage contact assemblies contacts and outer shells copper alloy gold over nickel (tin on coax ground pc tails) ring, retaining copper alloy nickel insulator (coaxial only) teflon none insulator (high voltage only) thermoplastic none u.l. file number: e8572 specifications temperature rating ? 55 c to 125 c signal contact current rating 7.5 a current capacity signal contact resistance 55 millivolt max. at 7.5 test current signal contact dielectric withstanding voltage 1250 vac at sea level coaxial current rating 5 a coaxial dielectric withstanding voltage 1000 vac at sea level coaxial impedance 75 or 50 coaxial vswr less than 1.30 + .03f for f up to 500 mhz coaxial insertion loss .3db loss at 500 mhz high power current rating up to 40 a high power dielectric withstanding voltage 1000 vac at sea level high voltage current rating 5 a high voltage contact dielectric withstanding voltage 2800 v at sea level
dimensions are shown in mm (inch) dimensions subject to change 44 d subminiature combo d ? coaxial 90 ? standard footprint .318 or .283 inch (sizes de-dc) 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5c1pjk87 demc5c1pjk87 demd5c1pjk87 demg5c1pjk87 da 7w2 damp7c2pjk87 damc7c2pjk87 damd7c2pjk87 damg7c2pjk87 da 11w1 damp11c1pjk87 damc11c1pjk87 damd11c1pjk87 damg11c1pjk87 da 3w3 damp3c3pjk87 damc3c3pjk87 damd3c3pjk87 damg3c3pjk87 da 3wk3 damp3ck3pjk87tm damc3ck3pjk87tm damd3ck3pjk87tm damg3ck3pjk87tm db 5w5 dbmp5c5pjk87 dbmc5c5pjk87 dbmd5c5pjk87 dbmg5c5pjk87 db 9w4 dbmp9c4pjk87 dbmc9c4pjk87 dbmd9c4pjk87 dbmg9c4pjk87 db 13w3 dbmp13c3pjk87 dbmc13c3pjk87 dbmd13c3pjk87 dbmg13c3pjk87 db 17w2 dbmp17c2pjk87 dbmc17c2pjk87 dbmd17c2pjk87 dbmg17c2pjk87 db 21w1 dbmp21c1pjk87 dbmc21c1pjk87 dbmd21c1pjk87 dbmg21c1pjk87 dc 8w8 dcmp8c8pjk87 dcmc8c8pjk87 dcmd8c8pjk87 dcmg8c8pjk87 dc 13w6 dcmp13c6pjk87 dcmc13c6pjk87 dcmd13c6pjk87 dcmg13c6pjk87 dc 17w5 dcmp17c5pjk87 dcmc17c5pjk87 dcmd17c5pjk87 dcmg17c5pjk87 dc 21wa4 dcmp21ca4pjk87 dcmc21ca4pjk87 dcmd21ca4pjk87 dcmg21ca4pjk87 dc 25w3 dcmp25c3pjk87 dcmc25c3pjk87 dcmd25c3pjk87 dcmg25c3pjk87 dc 27w2 dcmp27c2pjk87 dcmc27c2pjk87 dcmd27c2pjk87 dcmg27c2pjk87 notes: * for 50 ohm coaxial substitute x for c. example: demp5x1pjk87 for contacts with 30 microinches gold substitute k127 for k87. example: demp5c1pjk127 for dd shell sizes, see page 46. keyed. screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. 0,82 (.032) 2,92 (.115) 0,76 (.030) a b c e 10 boardlock d 12,34 (.486) 8,64 (.340) 6,50 0,25 (.256 .010) bracket, metal rivnut #4-40 unc screw lock #4-40 unc 3,89 (.153) min 0,56 (.023) 0,51 (.020) 2,54 (.100) 11,94 0,33 (.470 .013) l 7,18 0,25 (.283 .010) 4,33 0,38 (.170 .015) f w 2,84 (.112) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 228-229. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226.
dimensions are shown in mm (inch) dimensions subject to change 45 d subminiature combo d ? coaxial 90 ? standard footprint .318 or .283 inch (sizes de-dc) 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5c1sja197 demc5c1sja197 demd5c1sja197 demg5c1sja197 da 7w2 damp7c2sja197 damc7c2sja197 damd7c2sja197 damg7c2sja197 da 11w1 damp11c1sja197 damc11c1sja197 damd11c1sja197 damg11c1sja197 da 3w3 damp3c3sja197 damc3c3sja197 damd3c3sja197 damg3c3sja197 da 3wk3 damp3ck3sja197tm damc3ck3sja197tm damd3ck3sja197tm damg3ck3sja197tm db 5w5 dbmp5c5sja197 dbmc5c5sja197 dbmd5c5sja197 dbmg5c5sja197 db 9w4 dbmp9c4sja197 dbmc9c4sja197 dbmd9c4sja197 dbmg9c4sja197 db 13w3 dbmp13c3sja197 dbmc13c3sja197 dbmd13c3sja197 dbmg13c3sja197 db 17w2 dbmp17c2sja197 dbmc17c2sja197 dbmd17c2sja197 dbmg17c2sja197 db 21w1 dbmp21c1sja197 dbmc21c1sja197 dbmd21c1sja197 dbmg21c1sja197 dc 8w8 dcmp8c8sja197 dcmc8c8sja197 dcmd8c8sja197 dcmg8c8sja197 dc 13w6 dcmp13c6sja197 dcmc13c6sja197 dcmd13c6sja197 dcmg13c6sja197 dc 17w5 dcmp17c5sja197 dcmc17c5sja197 dcmd17c5sja197 dcmg17c5sja197 dc 21wa4 dcmp21ca4sja197 dcmc21ca4sja197 dcmd21ca4sja197 dcmg21ca4sja197 dc 25w3 dcmp25c3sja197 dcmc25c3sja197 dcmd25c3sja197 dcmg25c3sja197 dc 27w2 dcmp27c2sja197 dcmc27c2sja197 dcmd27c2sja197 dcmg27c2sja197 notes: * for 50 ohm coaxial substitute x for c. example: demp5x1sja197 for contacts with 30 microinches gold substitute k126 for a197. example: demp5c1sjk126 for dd shell sizes, see page 47. keyed. 10 0,79 (.031) 2,92 (.115) 0,76 (.030) a b c e d boardlock 12,34 (.486) 8,64 (.340) bracket, metal rivnut #4-40 unc screw lock #4-40 unc 6,50 0,25 (.256 .010) 3,89 (.153) min 0,56 (.023) 0,51 (.020) 2,54 (.100) 11,94 0,33 (.470 .013) l 2,84 (.112) f w 7,18 0,25 (.283 .010) 4,33 0,38 (.170 .015) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47.04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. screw lock, boardlock and signal contacts removed for clarity screw lock, boardlock and coaxial contact removed for clarity receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 231-232. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226.
dimensions are shown in mm (inch) dimensions subject to change 46 d subminiature combo d ? coaxial 90 ? standard footprint .489 or .454 inch (size dd) 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks dd 24w7 ddmp24c7pjk87 ddmc24c7pjk87 ddmd24c7pjk87 ddmg24c7pjk87 dd 36w4 ddmp36c4pjk87 ddmc36c4pjk87 ddmd36c4pjk87 ddmg36c4pjk87 dd 43w2 ddmp43c2pjk87 ddmc43c2pjk87 ddmd43c2pjk87 ddmg43c2pjk87 dd 47w1 ddmp47c1pjk87 ddmc47c1pjk87 ddmd47c1pjk87 ddmg47c1pjk87 notes: * for 50 ohm coaxial substitute x for c. example: ddmg36x4pjk87 for contacts with 30 microinches gold substitute k127 for k87. example: ddmp24c7pjk127 a c b d e 0,76 (.030) 0,82 (.032) 2,92 (.115) boardlock 10 6,50 0,25 (.256 .010) 13,74 (.541) 10,06 (.396) bracket, metal screw lock #4-40 unc 3,89 (.153) min 11,94 0,33 (.470 .013) l 2,54 (.100) 0,51 (.020) 0,56 (.023) 11,53 0,25 (.454 .010) 5,68 (.224) 2,84 (.112) 4,33 0,38 (.170 .015) rivnut #4-40 unc f w screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contacts removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 230. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226.
dimensions are shown in mm (inch) dimensions subject to change 47 a c b 0,76 (.030) 0,82 (.032) 10 e 2,92 (.115) d boardlock d subminiature combo d ? coaxial 90 ? standard footprint .489 or .454 inch (size dd) 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks dd 24w7 ddmp24c7sja197 ddmc24c7sja197 ddmd24c7sja197 ddmg24c7sja197 dd 36w4 ddmp36c4sja197 ddmc36c4sja197 ddmd36c4sja197 ddmg36c4sja197 dd 43w2 ddmp43c2sja197 ddmc43c2sja197 ddmd43c2sja197 ddmg43c2sja197 dd 47w1 ddmp47c1sja197 ddmc47c1sja197 ddmd47c1sja197 ddmg47c1sja197 notes: * for 50 ohm coaxial substitute x for c. example: ddmg36x4sja197 for contacts with 30 microinches gold substitute k126 for a197. example: ddmp24c7sjk126 screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contact removed for clarity 6,50 0,25 (.256 .010) 13,74 (.541) 10,06 (.396) bracket, metal screw lock #4-40 unc l 3,89 (.153) min 0,56 (.023) 0,51 (.020) 2,54 (.100) 11,94 0,33 (.470 .013) w f 5,68 (.224) 11,53 0,25 (.454 .010) 4,33 0,38 (.170 .015) 2,84 (.112) rivnut #4-40 unc dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 233. for panel cutouts, see page 221. for hardware views (standard), see page 226. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226.
dimensions are shown in mm (inch) dimensions subject to change 48 53,15 0,35 (2.095 .014) 47,04 (1.852) 38,38 (1.510) 12,91(.508) max 7,87(.310) 2,80 0,25 (.110 .010) 10 boardlock a3 a2 a1 1 6 6,13 0,13 (.241 .005) 2,90 0,21 (.114 .008) 10,17 (.400) (signal and coax) 12,71 (.500) (signal and coax) 15,25 (.600) (coax only) 6,27 0,25 (.247 .010) d-subminiature combo d ? 13c3 special ? receptacle only receptacle reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 236 (rear shell ref. is 0,76 (.030) from front shell). for panel cutouts, see page 221. part number db111949-43 finishes signal and coaxial center contact finish: 30 inches gold. note: for additional materials and finishes, see introduction page 43. engaging face
dimensions are shown in mm (inch) dimensions subject to change 49 d subminiature combo d ? 3c3 shielded special ? receptacle only receptacle engaging face dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,25 (.010) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,17 (.243) a c b e d 10 9,37 (.369) 12,12 (.477) reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 231. for panel cutouts, see page 221. note: connector supplied with boardlocks. materials and finishes body material: zinc body finish: tin coaxial center contact finish: 30 inches gold note: for additional materials and finishes, see introduction page 43. part number dam53512-1405 4,19 - 2,79 (.165 - .110) 0,56 (.023) 0,51 (.020) 2,54 (.100) 12,62 (.497) f w
dimensions are shown in mm (inch) dimensions subject to change 50 d subminiature combo d ? coaxial 90 ? european footprint 10,2 or 9,4 mm (sizes de-dc) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. plug reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 234-235. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contact removed for clarity a c b d 0,82 (.032) 2,92 (.115) 0,60 (.024) 10 e boardlock 1,00 (.039) screw lock #4-40 unc 6,50 0,25 (.256 .010) 14,55 (.573) 10,85 (.427) rivnut #4-40 unc bracket, metal 2,54 (.100) 0,51 (.020) 0,56 (.023) 2,89 (.113) min 11,94 0,33 (.470 .013) l 4,00 (.157) 2,54 (.100) 9,40 0,20 (.370 .008) w f engaging face 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5c1pvk87 demc5c1pvk87 demd5c1pvk87 demg5c1pvk87 da 7w2 damp7c2pvk87 damc7c2pvk87 damd7c2pvk87 damg7c2pvk87 da 11w1 damp11c1pvk87 damc11c1pvk87 damd11c1pvk87 damg11c1pvk87 da 3w3 damp3c3pvk87 damc3c3pvk87 damd3c3pvk87 damg3c3pvk87 da 3wk3 damp3ck3pvk87tm damc3ck3pvk87tm damd3ck3pvk87tm damg3ck3pvk87tm db 5w5 dbmp5c5pvk87 dbmc5c5pvk87 dbmd5c5pvk87 dbmg5c5pvk87 db 9w4 dbmp9c4pvk87 dbmc9c4pvk87 dbmd9c4pvk87 dbmg9c4pvk87 db 13w3 dbmp13c3pvk87 dbmc13c3pvk87 dbmd13c3pvk87 dbmg13c3pvk87 db 17w2 dbmp17c2pvk87 dbmc17c2pvk87 dbmd17c2pvk87 dbmg17c2pvk87 db 21w1 dbmp21c1pvk87 dbmc21c1pvk87 dbmd21c1pvk87 dbmg21c1pvk87 dc 8w8 dcmp8c8pvk87 dcmc8c8pvk87 dcmd8c8pvk87 dcmg8c8pvk87 dc 13w6 dcmp13c6pvk87 dcmc13c6pvk87 dcmd13c6pvk87 dcmg13c6pvk87 dc 17w5 dcmp17c5pvk87 dcmc17c5pvk87 dcmd17c5pvk87 dcmg17c5pvk87 dc 21wa4 dcmp21ca4pvk87 dcmc21ca4pvk87 dcmd21ca4pvk87 dcmg21ca4pvk87 dc 25w3 dcmp25c3pvk87 dcmc25c3pvk87 dcmd25c3pvk87 dcmg25c3pvk87 dc 27w2 dcmp27c2pvk87 dcmc27c2pvk87 dcmd27c2pvk87 dcmg27c2pvk87 for m3 threads replace mp with ms, mc with ml, md with mo, mg with mj. notes: * for 50 ohm coaxial substitute x for c. example: demp5x1pvk87 for tin plated pc tails add a226 (signal contacts only). example: demp5c1pvk87a226 for performance class 2 substitute k127 for k87. example: demp5c1pvk127 for dd shell sizes (standard footprint) see page 46. keyed.
dimensions are shown in mm (inch) dimensions subject to change 51 d subminiature combo d ? coaxial 90 ? european footprint 10,2 or 9,4 mm (sizes de-dc) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. e a c b 10 0,60 (.024) 0,82 (.032) 2,92 (.115) d boardlock 1,00 (.039) 6,50 0,25 (.256 .010) 10,85 (.427) 14,55 (.573) bracket, metal rivnut #4-40 unc screw lock 0,51 (.020) 2,89 (.113) min 2.54 (.100) 0,56 (.023) 11,94 0,33 (.470 .013) l 4,00 (.157) 2,54 (.100) 9,40 0,20 (.370 .008) w f receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 236-237. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. for alternate 50 ohm coaxial configuration, see page 225. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. 75 ohm part numbers* with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5c1sva197 demc5c1sva197 demd5c1sva197 demg5c1sva197 da 7w2 damp7c2sva197 damc7c2sva197 damd7c2sva197 damg7c2sva197 da 11w1 damp11c1sva197 damc11c1sva197 damd11c1sva197 damg11c1sva197 da 3w3 damp3c3sva197 damc3c3sva197 damd3c3sva197 damg3c3sva197 da 3wk3 damp3ck3sva197tm damc3ck3sva197tm damd3ck3sva197tm damg3ck3sva197tm db 5w5 dbmp5c5sva197 dbmc5c5sva197 dbmd5c5sva197 dbmg5c5sva197 db 9w4 dbmp9c4sva197 dbmc9c4sva197 dbmd9c4sva197 dbmg9c4sva197 db 13w3 dbmp13c3sva197 dbmc13c3sva197 dbmd13c3sva197 dbmg13c3sva197 db 17w2 dbmp17c2sva197 dbmc17c2sva197 dbmd17c2sva197 dbmg17c2sva197 db 21w1 dbmp21c1sva197 dbmc21c1sva197 dbmd21c1sva197 dbmg21c1sva197 dc 8w8 dcmp8c8sva197 dcmc8c8sva197 dcmd8c8sva197 dcmg8c8sva197 dc 13w6 dcmp13c6sva197 dcmc13c6sva197 dcmd13c6sva197 dcmg13c6sva197 dc 17w5 dcmp17c5sva197 dcmc17c5sva197 dcmd17c5sva197 dcmg17c5sva197 dc 21wa4 dcmp21ca4sva197 dcmc21ca4sva197 dcmd21ca4sva197 dcmg21ca4sva197 dc 25w3 dcmp25c3sva197 dcmc25c3sva197 dcmd25c3sva197 dcmg25c3sva197 dc 27w2 dcmp27c2sva197 dcmc27c2sva197 dcmd27c2sva197 dcmg27c2sva197 for m3 threads replace mp with ms, mc with ml, md with mo, mg with mj. notes: * for 50 ohm coaxial substitute x for c. example: demp5x1sva197 for performance class 2 substitute k126 for a197. example: demp5c1svk126 for dd shell sizes (standard footprint) see page 47. keyed.
dimensions are shown in mm (inch) dimensions subject to change 52 d subminiature combo d ? coaxial straight ? standard pc tails (sizes de-dc) 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5c1pnk87 demz5c1pnk87 demn5c1pnk87 da 7w2 damv7c2pnk87 damz7c2pnk87 damn7c2pnk87 da 11w1 damv11c1pnk87 damz11c1pnk87 damn11c1pnk87 da 3w3 damv3c3pnk87 damz3c3pnk87 damn3c3pnk87 da 3wk3 damv3ck3pnk87tm damz3ck3pnk87tm damn3ck3pnk87tm db 5w5 dbmv5c5pnk87 dbmz5c5pnk87 dbmn5c5pnk87 db 9w4 dbmv9c4pnk87 dbmz9c4pnk87 dbmn9c4pnk87 db 13w3 dbmv13c3pnk87 dbmz13c3pnk87 dbmn13c3pnk87 db 17w2 dbmv17c2pnk87 dbmz17c2pnk87 dbmn17c2pnk87 db 21w1 dbmv21c1pnk87 dbmz21c1pnk87 dbmn21c1pnk87 dc 8w8 dcmv8c8pnk87 dcmz8c8pnk87 dcmn8c8pnk87 dc 13w6 dcmv13c6pnk87 dcmz13c6pnk87 dcmn13c6pnk87 dc 17w5 dcmv17c5pnk87 dcmz17c5pnk87 dcmn17c5pnk87 dc 21wa4 dcmv21ca4pnk87 dcmz21ca4pnk87 dcmn21ca4pnk87 dc 25w3 dcmv25c3pnk87 dcmz25c3pnk87 dcmn25c3pnk87 dc 27w2 dcmv27c2pnk87 dcmz27c2pnk87 dcmn27c2pnk87 notes: * for 50 ohm coaxial substitute x for c. example: demv5x1pnk87 for contacts with 30 microinches gold substitute k127 for k87. example: demn5c1pnk127 for dd shell sizes, see page 54. keyed. screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and coaxial contact removed for clarity a c b e d 10 6,50 0,25 (.256 .010) 0,76 (.030) 0,82 (.032) 3,45 (.136) 7,62 0,25 (.300 .010) screw lock #4-40 unc 2,92 (.115) 4,52 (.178) standoff #4-40 unc boardlock 0,51 (.020) 0,62 (.024) 2,54 (.100) l f w 2,84 (.112) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 238-239. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039)
dimensions are shown in mm (inch) dimensions subject to change 53 d subminiature combo d ? coaxial straight ? standard pc tails (sizes de-dc) 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5c1sna197 demz5c1sna197 demn5c1sna197 da 7w2 damv7c2sna197 damz7c2sna197 damn7c2sna197 da 11w1 damv11c1sna197 damz11c1sna197 damn11c1sna197 da 3w3 damv3c3sna197 damz3c3sna197 damn3c3sna197 da 3wk3 damv3ck3sna197tm damz3ck3sna197tm damn3ck3sna197tm db 5w5 dbmv5c5sna197 dbmz5c5sna197 dbmn5c5sna197 db 9w4 dbmv9c4sna197 dbmz9c4sna197 dbmn9c4sna197 db 13w3 dbmv13c3sna197 dbmz13c3sna197 dbmn13c3sna197 db 17w2 dbmv17c2sna197 dbmz17c2sna197 dbmn17c2sna197 db 21w1 dbmv21c1sna197 dbmz21c1sna197 dbmn21c1sna197 dc 8w8 dcmv8c8sna197 dcmz8c8sna197 dcmn8c8sna197 dc 13w6 dcmv13c6sna197 dcmz13c6sna197 dcmn13c6sna197 dc 17w5 dcmv17c5sna197 dcmz17c5sna197 dcmn17c5sna197 dc 21wa4 dcmv21ca4sna197 dcmz21ca4sna197 dcmn21ca4sna197 dc 25w3 dcmv25c3sna197 dcmz25c3sna197 dcmn25c3sna197 dc 27w2 dcmv27c2sna197 dcmz27c2sna197 dcmn27c2sna197 notes: * for 50 ohm coaxial substitute x for c. example: demv5x1sna197 for contacts with 30 microinches gold substitute k126 for a197. example: demn5c1snk126 for dd shell sizes, see page 55. keyed. hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) a c b e d 10 0,76 (.030) 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) 3,45 (.136) 2,92 (.115) boardlock 0,82 (.032) screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 0,51 (.020) 0,62 (.024) 2,54 (1.00) l f w 2,84 (.112) receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 241-242. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225.
dimensions are shown in mm (inch) dimensions subject to change 54 d subminiature combo d ? coaxial straight ? standard pc tails (size dd) 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24c7pnk87 ddmz24c7pnk87 ddmn24c7pnk87 dd 36w4 ddmv36c4pnk87 ddmz36c4pnk87 ddmn36c4pnk87 dd 43w2 ddmv43c2pnk87 ddmz43c2pnk87 ddmn43c2pnk87 dd 47w1 ddmv47c1pnk87 ddmz47c1pnk87 ddmn47c1pnk87 notes: * for 50 ohm coaxial substitute x for c. example: ddmv24x7pnk87 for contacts with 30 microinches gold substitute k127 for k87. example: ddmn24c7pnk127 hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity a c b 10 e d 0,76 (.030) 0,82 (.032) 3,45 (.136) 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 0,62 (.024) 0,51 (.020) 2,54 (.100) l w f 5,69 (.224) 2,84 (.112) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 240. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225.
dimensions are shown in mm (inch) dimensions subject to change 55 a c b 10 e d d subminiature combo d ? coaxial straight ? standard pc tails (size dd) 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24c7sna197 ddmz24c7sna197 ddmn24c7sna197 dd 36w4 ddmv36c4sna197 ddmz36c4sna197 ddmn36c4sna197 dd 43w2 ddmv43c2sna197 ddmz43c2sna197 ddmn43c2sna197 dd 47w1 ddmv47c1sna197 ddmz47c1sna197 ddmn47c1sna197 notes: * for 50 ohm coaxial substitute x for c. example: ddmv24x7sna197 for contacts with 30 microinches gold substitute k126 for a197. example: ddmn24c7snk126 hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 7,62 0,25 (.300 .010) 0,76 (.030) 0,82 (.032) 3,45 (.136) 6,50 0,25 (.256 .010) 2,92 (.115) boardlock 0,62 (.024) 0,51 (.020) 2,54 (.100) l f 5,69 (.224) 2,84 (.112) w dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 243. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225.
dimensions are shown in mm (inch) dimensions subject to change 56 d subminiature combo d ? coaxial straight ? european pc tails (sizes de-dc) hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) a c b e 10 d 0,51 (.020) 2,54 (.100) 0,62 (.024) l 2,84 (.112) w f 3,45 (.136) 0,60 (.024) 0,82 (.032) 2,91 (.115) 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 238-239. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5c1pyk87 demz5c1pyk87 demn5c1pyk87 da 7w2 damv7c2pyk87 damz7c2pyk87 damn7c2pyk87 da 11w1 damv11c1pyk87 damz11c1pyk87 damn11c1pyk87 da 3w3 damv3c3pyk87 damz3c3pyk87 damn3c3pyk87 da 3wk3 damv3ck3pyk87tm damz3ck3pyk87tm damn3ck3pyk87tm db 5w5 dbmv5c5pyk87 dbmz5c5pyk87 dbmn5c5pyk87 db 9w4 dbmv9c4pyk87 dbmz9c4pyk87 dbmn9c4pyk87 db 13w3 dbmv13c3pyk87 dbmz13c3pyk87 dbmn13c3pyk87 db 17w2 dbmv17c2pyk87 dbmz17c2pyk87 dbmn17c2pyk87 db 21w1 dbmv21c1pyk87 dbmz21c1pyk87 dbmn21c1pyk87 dc 8w8 dcmv8c8pyk87 dcmz8c8pyk87 dcmn8c8pyk87 dc 13w6 dcmv13c6pyk87 dcmz13c6pyk87 dcmn13c6pyk87 dc 17w5 dcmv17c5pyk87 dcmz17c5pyk87 dcmn17c5pyk87 dc 21wa4 dcmv21ca4pyk87 dcmz21ca4pyk87 dcmn21ca4pyk87 dc 25w3 dcmv25c3pyk87 dcmz25c3pyk87 dcmn25c3pyk87 dc 27w2 dcmv27c2pyk87 dcmz27c2pyk87 dcmn27c2pyk87 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: * for 50 ohm coaxial substitute x for c. example: demv5x1pyk87 for tin plated pc tails add a226 (signal contacts only). example: demv5c1pyk87a226 for performance class 2 substitute k127 for k87. example: demv5c1pyk127 for dd shell sizes, see page 58. keyed.
dimensions are shown in mm (inch) dimensions subject to change 57 a c b e 10 d 3,45 (.136) 0,60 (.024) 0,82 (.032) 2,92 (.115) 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 0,51 (.020) 2,54 (.100) 0,62 (.024) l 2,84 (.112) f w d subminiature combo d ? coaxial straight ? european pc tails (sizes de-dc) dimensions shell size a 0.38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 241-242. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5c1sya197 demz5c1sya197 demn5c1sya197 da 7w2 damv7c2sya197 damz7c2sya197 damn7c2sya197 da 11w1 damv11c1sya197 damz11c1sya197 damn11c1sya197 da 3w3 damv3c3sya197 damz3c3sya197 damn3c3sya197 da 3wk3 damv3ck3sya197tm damz3ck3sya197tm damn3ck3sya197tm db 5w5 dbmv5c5sya197 dbmz5c5sya197 dbmn5c5sya197 db 9w4 dbmv9c4sya197 dbmz9c4sya197 dbmn9c4sya197 db 13w3 dbmv13c3sya197 dbmz13c3sya197 dbmn13c3sya197 db 17w2 dbmv17c2sya197 dbmz17c2sya197 dbmn17c2sya197 db 21w1 dbmv21c1sya197 dbmz21c1sya197 dbmn21c1sya197 dc 8w8 dcmv8c8sya197 dcmz8c8sya197 dcmn8c8sya197 dc 13w6 dcmv13c6sya197 dcmz13c6sya197 dcmn13c6sya197 dc 17w5 dcmv17c5sya197 dcmz17c5sya197 dcmn17c5sya197 dc 21wa4 dcmv21ca4sya197 dcmz21ca4sya197 dcmn21ca4sya197 dc 25w3 dcmv25c3sya197 dcmz25c3sya197 dcmn25c3sya197 dc 27w2 dcmv27c2sya197 dcmz27c2sya197 dcmn27c2sya197 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: * for 50 ohm coaxial substitute x for c. example: demv5x1sya197 for performance class 2 substitute k126 for a197. example: demv5c1syk126 for dd shell sizes, see page 59. keyed.
dimensions are shown in mm (inch) dimensions subject to change 58 d a c b e 10 7,62 0,25 (.300 .010) 0,60 (.024) 0,82 (.032) 2,92 (.115) 6,50 0,25 (.256 .010) 3,45 (.136) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc l 0,51 (.020) 2,54 (.100) 0,62 (.024) 5,69 (.224) 2,84 (.112) w f d subminiature combo d ? coaxial straight ? european pc tails (size dd) hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 240. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24c7pyk87 ddmz24c7pyk87 ddmn24c7pyk87 dd 36w4 ddmv36c4pyk87 ddmz36c4pyk87 ddmn36c4pyk87 dd 43w2 ddmv43c2pyk87 ddmz43c2pyk87 ddmn43c2pyk87 dd 47w1 ddmv47c1pyk87 ddmz47c1pyk87 ddmn47c1pyk87 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: * for 50 ohm coaxial substitute x for c. example: ddmv24x7pyk87 for tin plated pc tails add a226 (signal contacts only). example: ddmv24c7pyk87a226 for performance class 2 substitute k127 for k87. example: ddmv24c7pyk127
dimensions are shown in mm (inch) dimensions subject to change 59 10 d a c b e 7,62 0,25 (.300 .010) 0,60 (.024) 0,82 (.032) 2,92 (.115) 6,50 0,25 (.256 .010) 3,45 (.136) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 0,51 (.020) 0,62 (.024) 2,54 (.100) l 2,84 (.112) 5,69 (.224) w f d subminiature combo d ? coaxial straight ? european pc tails (size dd) hardware and signal contacts removed for clarity hardware and coaxial contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 243. for panel cutouts, see page 221. for alternate 50 ohm coaxial configuration, see page 225. 75 ohm part numbers* with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24c7sya197 ddmz24c7sya197 ddmn24c7sya197 dd 36w4 ddmv36c4sya197 ddmz36c4sya197 ddmn36c4sya197 dd 43w2 ddmv43c2sya197 ddmz43c2sya197 ddmn43c2sya197 dd 47w1 ddmv47c1sya197 ddmz47c1sya197 ddmn47c1sya197 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: * for 50 ohm coaxial substitute x for c. example: ddmv24x7sya197 for performance class 2 substitute k126 for a197. example: ddmv24c7syk126
dimensions are shown in mm (inch) dimensions subject to change 60 d subminiature combo d ? 40 a high power 90 ? standard footprint .489 or .454 inch (sizes de-dc) part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5h1pjk87 demc5h1pjk87 demd5h1pjk87 demg5h1pjk87 da 7w2 damp7h2pjk87 damc7h2pjk87 damd7h2pjk87 damg7h2pjk87 da 11w1 damp11h1pjk87 damc11h1pjk87 damd11h1pjk87 damg11h1pjk87 da 3w3 damp3h3pjk87 damc3h3pjk87 damd3h3pjk87 damg3h3pjk87 da 3wk3 damp3hk3pjk87tm damc3hk3pjk87tm damd3hk3pjk87tm damg3hk3pjk87tm db 5w5 dbmp5h5pjk87 dbmc5h5pjk87 dbmd5h5pjk87 dbmg5h5pjk87 db 9w4 dbmp9h4pjk87 dbmc9h4pjk87 dbmd9h4pjk87 dbmg9h4pjk87 db 13w3 dbmp13h3pjk87 dbmc13h3pjk87 dbmd13h3pjk87 dbmg13h3pjk87 db 17w2 dbmp17h2pjk87 dbmc17h2pjk87 dbmd17h2pjk87 dbmg17h2pjk87 db 21w1 dbmp21h1pjk87 dbmc21h1pjk87 dbmd21h1pjk87 dbmg21h1pjk87 dc 8w8 dcmp8h8pjk87 dcmc8h8pjk87 dcmd8h8pjk87 dcmg8h8pjk87 dc 13w6 dcmp13h6pjk87 dcmc13h6pjk87 dcmd13h6pjk87 dcmg13h6pjk87 dc 17w5 dcmp17h5pjk87 dcmc17h5pjk87 dcmd17h5pjk87 dcmg17h5pjk87 dc 21wa4 dcmp21ha4pjk87 dcmc21ha4pjk87 dcmd21ha4pjk87 dcmg21ha4pjk87 dc 25w3 dcmp25h3pjk87 dcmc25h3pjk87 dcmd25h3pjk87 dcmg25h3pjk87 dc 27w2 dcmp27h2pjk87 dcmc27h2pjk87 dcmd27h2pjk87 dcmg27h2pjk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: demp5h1pjk127 for dd shell sizes, see page 62. keyed. screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. a c b e d 0,76 (.030) 3,18 (.125) 2,92 (.115) boardlock 10 3,89 (.153) min. 20,57 0,38 (.810 .015) l f w 2,84 (.112) 11,53 0,25 (.454 .010) 4,33 0,38 (.170 .015) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 244-245. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. 12,34 (.486) 8,64 (.340) 6,50 0,25 (.256 .010) bracket, metal rivnut #4-40 unc screw lock #4-40 unc
dimensions are shown in mm (inch) dimensions subject to change 61 d subminiature combo d ? 40 a high power 90 ? standard footprint .489 or .454 inch (sizes de-dc) part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5h1sja197 demc5h1sja197 demd5h1sja197 demg5h1sja197 da 7w2 damp7h2sja197 damc7h2sja197 damd7h2sja197 damg7h2sja197 da 11w1 damp11h1sja197 damc11h1sja197 damd11h1sja197 damg11h1sja197 da 3w3 damp3h3sja197 damc3h3sja197 damd3h3sja197 damg3h3sja197 da 3wk3 damp3hk3sja197tm damc3hk3sja197tm damd3hk3sja197tm damg3hk3sja197tm db 5w5 dbmp5h5sja197 dbmc5h5sja197 dbmd5h5sja197 dbmg5h5sja197 db 9w4 dbmp9h4sja197 dbmc9h4sja197 dbmd9h4sja197 dbmg9h4sja197 db 13w3 dbmp13h3sja197 dbmc13h3sja197 dbmd13h3sja197 dbmg13h3sja197 db 17w2 dbmp17h2sja197 dbmc17h2sja197 dbmd17h2sja197 dbmg17h2sja197 db 21w1 dbmp21h1sja197 dbmc21h1sja197 dbmd21h1sja197 dbmg21h1sja197 dc 8w8 dcmp8h8sja197 dcmc8h8sja197 dcmd8h8sja197 dcmg8h8sja197 dc 13w6 dcmp13h6sja197 dcmc13h6sja197 dcmd13h6sja197 dcmg13h6sja197 dc 17w5 dcmp17h5sja197 dcmc17h5sja197 dcmd17h5sja197 dcmg17h5sja197 dc 21wa4 dcmp21ha4sja197 dcmc21ha4sja197 dcmd21ha4sja197 dcmg21ha4sja197 dc 25w3 dcmp25h3sja197 dcmc25h3sja197 dcmd25h3sja197 dcmg25h3sja197 dc 27w2 dcmp27h2sja197 dcmc27h2sja197 dcmd27h2sja197 dcmg27h2sja197 note: for contacts with 30 microinches of gold substitute k126 for a197. example: demp5h1sjk126 for dd shell sizes, see page 63. keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. 2,92 (.115) 0,76 (.030) l 20,57 0,38 (.810 .015) 3,89 (.153) min. 4,33 0,38 (.170 .015) 2,84 (.112) 11,53 0,25 (.454 .010) w f screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 247-248. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. screw lock #4-40 unc bracket, metal rivnut #4-40 unc 12,34 (.486) 8,64 (.340) 6,50 0,25 (.256 .010)
dimensions are shown in mm (inch) dimensions subject to change 62 d subminiature combo d ? 40 a high power 90 ? standard footprint .489 or .454 inch (size dd) part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks dd 24w7 ddmp24h7pjk87 ddmc24h7pjk87 ddmd24h7pjk87 ddmg24h7pjk87 dd 36w4 ddmp36h4pjk87 ddmc36h4pjk87 ddmd36h4pjk87 ddmg36h4pjk87 dd 43w2 ddmp43h2pjk87 ddmc43h2pjk87 ddmd43h2pjk87 ddmg43h2pjk87 dd 47w1 ddmp47h1pjk87 ddmc47h1pjk87 ddmd47h1pjk87 ddmg47h1pjk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: ddmp24h7pjk127 10 c a e d 3.18 (.125) 0,76 (.030) 2,92 (.115) b boardlock 13,74 (.541) 10,06 (.396) 6,50 0,25 (.256 .010) screw lock #4-40 unc rivnut #4-40 unc bracket, metal 20,57 0,38 (.810 .015) 3,89 (.153) min l 5,68 (.224) 4,33 0,38 (.170 .015) 2,84 (.112) f w 11,53 0,25 (.454 .010) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 246. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see reader?s resource page 226.
dimensions are shown in mm (inch) dimensions subject to change 63 d subminiature combo d ? 40 a high power 90 ? standard footprint .489 or .454 inch (size dd) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks dd 24w7 ddmp24h7sja197 ddmc24h7sja197 ddmd24h7sja197 ddmg24h7sja197 dd 36w4 ddmp36h4sja197 ddmc36h4sja197 ddmd36h4sja197 ddmg36h4sja197 dd 43w2 ddmp43h2sja197 ddmc43h2sja197 ddmd43h2sja197 ddmg43h2sja197 dd 47w1 ddmp47h1sja197 ddmc47h1sja197 ddmd47h1sja197 ddmg47h1sja197 note: for contacts with 30 microinches gold substitute k126 for a197. example: ddmp24h7sjk126 0,76 (.030) 3,18 (.125) 2,92 (.115) d boardlock 10 a c b e 13,74 (.541) 10,06 (.396) 6,50 0,25 (.256 .010) screw lock #4-40 unc rivnut #4-40 unc bracket, metal 20,57 0,38 (.810 .015) l 3,89 (.153) min 5,68 (.224) 2,84 (.112) f w 11,53 0,25 (.454 .010) 4,33 0,38 (.170 .015) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 249. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see page 226.
dimensions are shown in mm (inch) dimensions subject to change 64 14,55 (.573) 10,85 (.427) 6,50 0,25 (.256 .010) rivnut #4-40 unc bracket, metal screw lock #4-40 unc dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. 1,00 (.039) a c b ed 2,90 (.114) 0,60 (.024) 2,92 (.115) bo ardlock 11,94 0,25 (.470 .010) 3,30 (.130) min. l 4,00 (.157) 2,54 (.100) 9,40 0,20 (.370 .008) w f d subminiature combo d ? 40 a high power 90 ? european footprint 10,2 or 9,4 mm (sizes de-dc) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 250-251. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5p1pvk87 demc5p1pvk87 demd5p1pvk87 demg5p1pvk87 da 7w2 damp7p2pvk87 damc7p2pvk87 damd7p2pvk87 damg7p2pvk87 da 11w1 damp11p1pvk87 damc11p1pvk87 damd11p1pvk87 damg11p1pvk87 da 3w3 damp3p3pvk87 damc3p3pvk87 damd3p3pvk87 damg3p3pvk87 da 3wk3 damp3pk3pvk87tm damc3pk3pvk87tm damd3pk3pvk87tm damg3pk3pvk87tm db 5w5 dbmp5p5pvk87 dbmc5p5pvk87 dbmd5p5pvk87 dbmg5p5pvk87 db 9w4 dbmp9p4pvk87 dbmc9p4pvk87 dbmd9p4pvk87 dbmg9p4pvk87 db 13w3 dbmp13p3pvk87 dbmc13p3pvk87 dbmd13p3pvk87 dbmg13p3pvk87 db 17w2 dbmp17p2pvk87 dbmc17p2pvk87 dbmd17p2pvk87 dbmg17p2pvk87 db 21w1 dbmp21p1pvk87 dbmc21p1pvk87 dbmd21p1pvk87 dbmg21p1pvk87 dc 8w8 dcmp8p8pvk87 dcmc8p8pvk87 dcmd8p8pvk87 dcmg8p8pvk87 dc 13w6 dcmp13p6pvk87 dcmc13p6pvk87 dcmd13p6pvk87 dcmg13p6pvk87 dc 17w5 dcmp17p5pvk87 dcmc17p5pvk87 dcmd17p5pvk87 dcmg17p5pvk87 dc 21wa4 dcmp21pa4pvk87 dcmc21pa4pvk87 dcmd21pa4pvk87 dcmg21pa4pvk87 dc 25w3 dcmp25p3pvk87 dcmc25p3pvk87 dcmd25p3pvk87 dcmg25p3pvk87 dc 27w2 dcmp27p2pvk87 dcmc27p2pvk87 dcmd27p2pvk87 dcmg27p2pvk87 for m3 threads replace mp with ms, mc with ml, md with mo, mg with mj. notes: for tin plated pc tails add a226 (signal contacts only). example demp5p1pvk87a226 for performance class 2 substitute k127 for k87. example: demp5p1pvk127 keyed.
dimensions are shown in mm (inch) dimensions subject to change 65 a c b e d 2,92 (.115) 2,90 (.114) 0,60 (.024) boardlock 1,00 (.039) 14,55 (.573) 10,85 (.427) 6,50 0,25 (.256 .010) rivnut #4-40 unc bracket, metal screw lock #4-40 unc 11,94 0,25 (.470 .010) 3,30 (.130) min. l 4,00 (.157) 2,54 (.100) 9,40 0,20 (.370 .008) w f d subminiature combo d ? 40 a high power 90 ? european footprint 10,2 or 9,4 mm (sizes de-dc) screw lock, boardlock, and signal contacts removed for clarity screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0.76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 252-253. for panel cutouts, see page 221. for alternate bracket configuration (when connectors are supplied without boardlocks), see page 226. note: dimension varies with alternate bracket configuration, see reader?s resource page 226. part numbers with metal bracket and rivnut #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks without boardlocks part number with screw locks with boardlocks de 5w1 demp5p1sva197 demc5p1sva197 demd5p1sva197 demg5p1sva197 da 7w2 damp7p2sva197 damc7p2sva197 damd7p2sva197 damg7p2sva197 da 11w1 damp11p1sva197 damc11p1sva197 damd11p1sva197 damg11p1sva197 da 3w3 damp3p3sva197 damc3p3sva197 damd3p3sva197 damg3p3sva197 da 3wk3 damp3pk3sva197tm damc3pk3sva197tm damd3pk3sva197tm damg3pk3sva197tm db 5w5 dbmp5p5sva197 dbmc5p5sva197 dbmd5p5sva197 dbmg5p5sva197 db 9w4 dbmp9p4sva197 dbmc9p4sva197 dbmd9p4sva197 dbmg9p4sva197 db 13w3 dbmp13p3sva197 dbmc13p3sva197 dbmd13p3sva197 dbmg13p3sva197 db 17w2 dbmp17p2sva197 dbmc17p2sva197 dbmd17p2sva197 dbmg17p2sva197 db 21w1 dbmp21p1sva197 dbmc21p1sva197 dbmd21p1sva197 dbmg21p1sva197 dc 8w8 dcmp8p8sva197 dcmc8p8sva197 dcmd8p8sva197 dcmg8p8sva197 dc 13w6 dcmp13p6sva197 dcmc13p6sva197 dcmd13p6sva197 dcmg13p6sva197 dc 17w5 dcmp17p5sva197 dcmc17p5sva197 dcmd17p5sva197 dcmg17p5sva197 dc 21wa4 dcmp21pa4sva197 dcmc21pa4sva197 dcmd21pa4sva197 dcmg21pa4sva197 dc 25w3 dcmp25p3sva197 dcmc25p3sva197 dcmd25p3sva197 dcmg25p3sva197 dc 27w2 dcmp27p2sva197 dcmc27p2sva197 dcmd27p2sva197 dcmg27p2sva197 for m3 threads replace mp with ms, mc with ml, md with mo, mg with mj. notes: for performance class 2 substitute k126 for a197. example: demp5p1svk126 keyed.
dimensions are shown in mm (inch) dimensions subject to change 66 d subminiature combo d ? 40 a high power straight ? standard pc tails (sizes de-dc) screw lock, boardlock and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5h1pnk87 demz5h1pnk87 demn5h1pnk87 da 7w2 damv7h2pnk87 damz7h2pnk87 damn7h2pnk87 da 11w1 damv11h1pnk87 damz11h1pnk87 damn11h1pnk87 da 3w3 damv3h3pnk87 damz3h3pnk87 damn3h3pnk87 da 3wk3 damv3hk3pnk87tm damz3hk3pnk87tm damn3hk3pnk87tm db 5w5 dbmv5h5pnk87 dbmz5h5pnk87 dbmn5h5pnk87 db 9w4 dbmv9h4pnk87 dbmz9h4pnk87 dbmn9h4pnk87 db 13w3 dbmv13h3pnk87 dbmz13h3pnk87 dbmn13h3pnk87 db 17w2 dbmv17h2pnk87 dbmz17h2pnk87 dbmn17h2pnk87 db 21w1 dbmv21h1pnk87 dbmz21h1pnk87 dbmn21h1pnk87 dc 8w8 dcmv8h8pnk87 dcmz8h8pnk87 dcmn8h8pnk87 dc 13w6 dcmv13h6pnk87 dcmz13h6pnk87 dcmn13h6pnk87 dc 17w5 dcmv17h5pnk87 dcmz17h5pnk87 dcmn17h5pnk87 dc 21wa4 dcmv21ha4pnk87 dcmz21ha4pnk87 dcmn21ha4pnk87 dc 25w3 dcmv25h3pnk87 dcmz25h3pnk87 dcmn25h3pnk87 dc 27w2 dcmv27h2pnk87 dcmz27h2pnk87 dcmn27h2pnk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: demv5h1pnk127 for dd shell sizes, see page 68. keyed. a c b e d 10 4,65 (.183) 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 3,18 (.125) 0,76 (.030) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc w f 2,84 (.112) l plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 254-255. for panel cutouts, see page 221.
dimensions are shown in mm (inch) dimensions subject to change 67 d subminiature combo d ? 40 a high power straight ? standard pc tails (sizes de-dc) screw lock, boardlock and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5h1sna197 demz5h1sna197 demn5h1sna197 da 7w2 damv7h2sna197 damz7h2sna197 damn7h2sna197 da 11w1 damv11h1sna197 damz11h1sna197 damn11h1sna197 da 3w3 damv3h3sna197 damz3h3sna197 damn3h3sna197 da 3wk3 damv3hk3sna197tm damz3hk3sna197tm damn3hk3sna197tm db 5w5 dbmv5h5sna197 dbmz5h5sna197 dbmn5h5sna197 db 9w4 dbmv9h4sna197 dbmz9h4sna197 dbmn9h4sna197 db 13w3 dbmv13h3sna197 dbmz13h3sna197 dbmn13h3sna197 db 17w2 dbmv17h2sna197 dbmz17h2sna197 dbmn17h2sna197 db 21w1 dbmv21h1sna197 dbmz21h1sna197 dbmn21h1sna197 dc 8w8 dcmv8h8sna197 dcmz8h8sna197 dcmn8h8sna197 dc 13w6 dcmv13h6sna197 dcmz13h6sna197 dcmn13h6sna197 dc 17w5 dcmv17h5sna197 dcmz17h5sna197 dcmn17h5sna197 dc 21wa4 dcmv21ha4sna197 dcmz21ha4sna197 dcmn21ha4sna197 dc 25w3 dcmv25h3sna197 dcmz25h3sna197 dcmn25h3sna197 dc 27w2 dcmv27h2sna197 dcmz27h2sna197 dcmn27h2sna197 note: for contacts with 30 microinches gold substitute k126 for a197. example: demv5h1snk126 for dd shell sizes, see page 69. keyed. a c b d e 10 4,65 (.183) 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 3,18 (.125) 0,76 (.030) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) l f w receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 257-258. for panel cutouts, see page 221.
dimensions are shown in mm (inch) dimensions subject to change 68 d subminiature combo d ? 40 a high power straight ? standard pc tails (size dd) screw lock, boardlock, and high power contact removed for clarity part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24h7pnk87 ddmz24h7pnk87 ddmn24h7pnk87 dd 36w4 ddmv36h4pnk87 ddmz36h4pnk87 ddmn36h4pnk87 dd 43w2 ddmv43h2pnk87 ddmz43h2pnk87 ddmn43h2pnk87 dd 47w1 ddmv47h1pnk87 ddmz47h1pnk87 ddmn47h1pnk87 note: for contacts with 30 microinches gold substitute k127 for k87. example: ddmv24h7pnk127 a c b e d 10 7,62 0,25 (.300 .010) 0,76 (.030) 3,18 (.125) 6,50 0,25 (.256 .010) 4,65 (.183) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 5,69 (.224) 2,84 (.112) l w f dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 256. for panel cutouts, see page 221.
dimensions are shown in mm (inch) dimensions subject to change 69 d subminiature combo d ? 40 a high power straight ? standard pc tails (size dd) screw lock, boardlock and high power contact removed for clarity part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24h7sna197 ddmz24h7sna197 ddmn24h7sna197 dd 36w4 ddmv36h4sna197 ddmz36h4sna197 ddmn36h4sna197 dd 43w2 ddmv43h2sna197 ddmz43h2sna197 ddmn43h2sna197 dd 47w1 ddmv47h1sna197 ddmz47h1sna197 ddmn47h1sna197 note: for contacts with 30 microinches gold substitute k126 for a197. example: ddmv24h7snk126 a c b e d 10 5,69 (.224) l w f 2,84 (.112) dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 259. for panel cutouts, see page 221. 7,62 0,25 (.300 .010) 6,50 0,25 (.256 .010) 3,18 (.125) 0,76 (.030) 4,65 (.183) 2,92 (.115) boardlock screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc
dimensions are shown in mm (inch) dimensions subject to change 70 a c b d e 10 7.62 0,25 (.300 .010) 0,60 (.024) 3,18 (.125) 6,50 0,25 (.256 .010) 2,92 (.115) boardlock 4,65 (.183) screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) l w f d subminiature combo d ? 40 a high power straight ? european pc tails (sizes de-dc) screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 254-255. for panel cutouts, see page 221. part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5h1pyk87 demz5h1pyk87 demn5h1pyk87 da 7w2 damv7h2pyk87 damz7h2pyk87 damn7h2pyk87 da 11w1 damv11h1pyk87 damz11h1pyk87 damn11h1pyk87 da 3w3 damv3h3pyk87 damz3h3pyk87 damn3h3pyk87 da 3wk3 damv3hk3pyk87tm damz3hk3pyk87tm damn3hk3pyk87tm db 5w5 dbmv5h5pyk87 dbmz5h5pyk87 dbmn5h5pyk87 db 9w4 dbmv9h4pyk87 dbmz9h4pyk87 dbmn9h4pyk87 db 13w3 dbmv13h3pyk87 dbmz13h3pyk87 dbmn13h3pyk87 db 17w2 dbmv17h2pyk87 dbmz17h2pyk87 dbmn17h2pyk87 db 21w1 dbmv21h1pyk87 dbmz21h1pyk87 dbmn21h1pyk87 dc 8w8 dcmv8h8pyk87 dcmz8h8pyk87 dcmn8h8pyk87 dc 13w6 dcmv13h6pyk87 dcmz13h6pyk87 dcmn13h6pyk87 dc 17w5 dcmv17h5pyk87 dcmz17h5pyk87 dcmn17h5pyk87 dc 21wa4 dcmv21ha4pyk87 dcmz21ha4pyk87 dcmn21ha4pyk87 dc 25w3 dcmv25h3pyk87 dcmz25h3pyk87 dcmn25h3pyk87 dc 27w2 dcmv27h2pyk87 dcmz27h2pyk87 dcmn27h2pyk87 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: for tin plated pc tails add a226 (signal contacts only). example: demv5h1pyk87a226 for performance class 2 substitute k127 for k87. example: demv5h1pyk127 for dd shell sizes, see page 72. keyed.
dimensions are shown in mm (inch) dimensions subject to change 71 10 e b c a d 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) 2,92 (.115) 0,60 (.024) 3,18 (.125) boardlock 4,65 (.183) screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) l w f d subminiature combo d ? 40 a high power straight ? european pc tails (sizes de-dc) screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 0,76 (.030) receptacle engaging face reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 257-258. for panel cutouts, see page 221. part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks de 5w1 demv5h1sya197 demz5h1sya197 demn5h1sya197 da 7w2 damv7h2sya197 damz7h2sya197 damn7h2sya197 da 11w1 damv11h1sya197 damz11h1sya197 damn11h1sya197 da 3w3 damv3h3sya197 damz3h3sya197 damn3h3sya197 da 3wk3 damv3hk3sya197tm damz3hk3sya197tm damn3hk3sya197tm db 5w5 dbmv5h5sya197 dbmz5h5sya197 dbmn5h5sya197 db 9w4 dbmv9h4sya197 dbmz9h4sya197 dbmn9h4sya197 db 13w3 dbmv13h3sya197 dbmz13h3sya197 dbmn13h3sya197 db 17w2 dbmv17h2sya197 dbmz17h2sya197 dbmn17h2sya197 db 21w1 dbmv21h1sya197 dbmz21h1sya197 dbmn21h1sya197 dc 8w8 dcmv8h8sya197 dcmz8h8sya197 dcmn8h8sya197 dc 13w6 dcmv13h6sya197 dcmz13h6sya197 dcmn13h6sya197 dc 17w5 dcmv17h5sya197 dcmz17h5sya197 dcmn17h5sya197 dc 21wa4 dcmv21ha4sya197 dcmz21ha4sya197 dcmn21ha4sya197 dc 25w3 dcmv25h3sya197 dcmz25h3sya197 dcmn25h3sya197 dc 27w2 dcmv27h2sya197 dcmz27h2sya197 dcmn27h2sya197 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: for performance class 2 substitute k126 for a197. example: demv5h1syk126 for dd shell sizes, see page 73. keyed.
dimensions are shown in mm (inch) dimensions subject to change 72 e a c b d 2,92 (.115) 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) boardlock 3,18 (.125) 0,60 (.024) 4,65 (.183) screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) 5,69 (.224) l w f d subminiature combo d ? 40 a high power straight ? european pc tails (size dd) screw lock, boardlock, and high power contact removed for clarity dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,41 (.016) l 0,25 (.010) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) 6,84 (.269) 0,99 (.039) plug engaging face reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see page 256. for panel cutouts, see page 221. part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24h7pyk87 ddmz24h7pyk87 ddmn24h7pyk87 dd 36w4 ddmv36h4pyk87 ddmz36h4pyk87 ddmn36h4pyk87 dd 43w2 ddmv43h2pyk87 ddmz43h2pyk87 ddmn43h2pyk87 dd 47w1 ddmv47h1pyk87 ddmz47h1pyk87 ddmn47h1pyk87 for m3 threads replace mv with mt, mz with mq, mn with mu. notes: for tin plated pc tails add a226 (signal contacts only). example ddmv24h7pyk87a226 for performance class 2 substitute k127 for k87. example: ddmv24h7pyk127
dimensions are shown in mm (inch) dimensions subject to change 73 e a c b d boardlock 2,92 (.115) 6,50 0,25 (.256 .010) 7,62 0,25 (.300 .010) 0,60 (.024) 3,18 (.125) 4,65 (.183) screw lock #4-40 unc 4,52 (.178) standoff #4-40 unc 2,84 (.112) 5,69 (.224) l w f d subminiature combo d ? 40 a high power straight ? european pc tails (size dd) screw lock, boardlock, and high power contact removed for clarity receptacle engaging face dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) l 0,25 (.010) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 0,76 (.030) reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see page 259. for panel cutouts, see page 221. part numbers with standoff #4-40 unc shell size layout part number without screw locks without boardlocks part number without screw locks with boardlocks part number with screw locks with boardlocks dd 24w7 ddmv24h7sya197 ddmz24h7sya197 ddmn24h7sya197 dd 36w4 ddmv36h4sya197 ddmz36h4sya197 ddmn36h4sya197 dd 43w2 ddmv43h2sya197 ddmz43h2sya197 ddmn43h2sya197 dd 47w1 ddmv47h1sya197 ddmz47h1sya197 ddmn47h1sya197 for m3 threads replace mv with mt, mz with mq, mn with mu. note: for performance class 2 substitute k126 for a197. example: ddmv24h7syk126
dimensions are shown in mm (inch) dimensions subject to change 74 d subminiature combo d ? 90 pc tail ? european footprint 10,2 or 9,4 mm (sizes de-dd) part numbers shell size layout part number without hardware part number metal bracket with #4-40 nut de 5w1 dem-5w1p-1a0n-k87 dem-5w1p-1a7n-k87 da 7w2 dam-7w2p-1a0n-k87 dam-7w2p-1a7n-k87 da 11w1 dam-11w1p-1a0n-k87 dam-11w1p-1a7n-k87 da 3w3 dam-3w3p-1a0n-k87 dam-3w3p-1a7n-k87 da 3wk3 dam-3wk3p-1a0n-k87 dam-3wk3p-1a7n-k87 db 5w5 dbm-5w5p-1a0n-k87 dbm-5w5p-1a7n-k87 db 9w4 dbm-9w4p-1a0n-k87 dbm-9w4p-1a7n-k87 db 13w3 dbm-13w3p-1a0n-k87 dbm-13w3p-1a7n-k87 db 17w2 dbm-17w2p-1a0n-k87 dbm-17w2p-1a7n-k87 db 21w1 dbm-21w1p-1a0n-k87 dbm-21w1p-1a7n-k87 dc 8w8 dcm-8w8p-1a0n-k87 dcm-8w8p-1a7n-k87 dc 13w6 dcm-13w6p-1a0n-k87 dcm-13w6p-1a7n-k87 dc 17w5 dcm-17w5p-1a0n-k87 dcm-17w5p-1a7n-k87 dc 21wa4 dcm-21wa4p-1a0n-k87 dcm-21wa4p-1a7n-k87 dc 25w3 dcm-25w3p-1a0n-k87 dcm-25w3p-1a7n-k87 dc 27w2 dcm-27w2p-1a0n-k87 dcm-27w2p-1a7n-k87 dd 24w7 ddm-24w7p-1a0n-k87 ddm-24w7p-1a7n-k87 dd 36w4 ddm-36w4p-1a0n-k87 ddm-36w4p-1a7n-k87 dd 43w2 ddm-43w2p-1a0n-k87 ddm-43w2p-1a7n-k87 dd 47w1 ddm-47w1p-1a0n-k87 ddm-47w1p-1a7n-k87 note: performance class 3 standard, for performance class 2 add -a 191. example: dem-5w1p-1a0n- a191 -k87 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) k 0,317 (.0125) k 0,25 (.010) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) connector footprint measured from the front shell. connector footprint measured from the rear shell. plug engaging face dd configuration 10 a c e d b 0,60 (.024) 3,05 (.120) 2,54 (.100) 9,40 0,20 (.370 .008) w f 5,00 (.197) 2,54 (.100) 9,40 0,20 (.370 .008) k l 5,08 (.200) 5,00 (.197) reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 260-262. for panel cutouts, see page 221. for hardware views (european), see page 227.
dimensions are shown in mm (inch) dimensions subject to change 75 d subminiature combo d ? 90 pc tail ? european footprint 10,2 or 9,4 mm (sizes de-dd) part numbers shell size layout part number without hardware part number metal bracket with #4-40 nut de 5w1 dem-5w1s-1a0n-a197 dem-5w1s-1a7n-a197 da 7w2 dam-7w2s-1a0n-a197 dam-7w2s-1a7n-a197 da 11w1 dam-11w1s-1a0n-a197 dam-11w1s-1a7n-a197 da 3w3 dam-3w3s-1a0n-a197 dam-3w3s-1a7n-a197 da 3wk3 dam-3wk3s-1a0n-a197 dam-3wk3s-1a7n-a197 db 5w5 dbm-5w5s-1a0n-a197 dbm-5w5s-1a7n-a197 db 9w4 dbm-9w4s-1a0n-a197 dbm-9w4s-1a7n-a197 db 13w3 dbm-13w3s-1a0n-a197 dbm-13w3s-1a7n-a197 db 17w2 dbm-17w2s-1a0n-a197 dbm-17w2s-1a7n-a197 db 21w1 dbm-21w1s-1a0n-a197 dbm-21w1s-1a7n-a197 dc 8w8 dcm-8w8s-1a0n-a197 dcm-8w8s-1a7n-a197 dc 13w6 dcm-13w6s-1a0n-a197 dcm-13w6s-1a7n-a197 dc 17w5 dcm-17w5s-1a0n-a197 dcm-17w5s-1a7n-a197 dc 21wa4 dcm-21wa4s-1a0n-a197 dcm-21wa4s-1a7n-a197 dc 25w3 dcm-25w3s-1a0n-a197 dcm-25w3s-1a7n-a197 dc 27w2 dcm-27w2s-1a0n-a197 dcm-27w2s-1a7n-a197 dd 24w7 ddm-24w7s-1a0n-a197 ddm-24w7s-1a7n-a197 dd 36w4 ddm-36w4s-1a0n-a197 ddm-36w4s-1a7n-a197 dd 43w2 ddm-43w2s-1a0n-a197 ddm-43w2s-1a7n-a197 dd 47w1 ddm-47w1s-1a0n-a197 ddm-47w1s-1a7n-a197 note: performance class 3 standard, for performance class 2 add -a 191. example: dem-5w1s-1a0n- a191-a197 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) k 0,318 (.0125) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) connector footprint measured from the front shell. connector footprint measured from the rear shell. receptacle engaging face dd configuration 10 a c e d b 0,60 (.024) 3,05 (.120) 2,54 (.100) 9,40 0,20 (.370 .008) w f 5,00 (.197) reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 263-265. for panel cutouts, see page 221. for hardware views (european), see page 227. 2,54 (.100) 9,40 0,20 (.370 .008) k l 5,08 (.200) 5,00 (.197)
dimensions are shown in mm (inch) dimensions subject to change 76 d subminiature combo d ? straight pc tails ? european (sizes de-dd) part numbers shell size layout part number x 4,60 (.181) part number x 6,05 (.238) de 5w1 dem-5w1p-ol2-k87 dem-5w1p-ol4-k87 da 7w2 dam-7w2p-ol2-k87 dam-7w2p-ol4-k87 da 11w1 dam-11w1p-ol2-k87 dam-11w1p-ol4-k87 da 3w3 dam-3w3p-ol2-k87 dam-3w3p-ol4-k87 da 3wk3 dam-3wk3p-ol2-k87 dam-3wk3p-ol4-k87 db 5w5 dbm-5w5p-ol2-k87 dbm-5w5p-ol4-k87 db 9w4 dbm-9w4p-ol2-k87 dbm-9w4p-ol4-k87 db 13w3 dbm-13w3p-ol2-k87 dbm-13w3p-ol4-k87 db 17w2 dbm-17w2p-ol2-k87 dbm-17w2p-ol4-k87 db 21w1 dbm-21w1p-ol2-k87 dbm-21w1p-ol4-k87 dc 8w8 dcm-8w8p-ol2-k87 dcm-8w8p-ol4-k87 dc 13w6 dcm-13w6p-ol2-k87 dcm-13w6p-ol4-k87 dc 17w5 dcm-17w5p-ol2-k87 dcm-17w5p-ol4-k87 dc 21wa4 dcm-21wa4p-ol2-k87 dcm-21wa4p-ol4-k87 dc 25w3 dcm-25w3p-ol2-k87 dcm-25w3p-ol4-k87 dc 27w2 dcm-27w2p-ol2-k87 dcm-27w2p-ol4-k87 dd 24w7 ddm-24w7p-ol2-k87 ddm-24w7p-ol4-k87 dd 36w4 ddm-36w4p-ol2-k87 ddm-36w4p-ol4-k87 dd 43w2 ddm-43w2p-ol2-k87 ddm-43w2p-ol4-k87 dd 47w1 ddm-47w1p-ol2-k87 ddm-47w1p-ol4-k87 note: performance class 3 standard, for performance class 2 add -a 191. example: dem-5w1p-ol2- a191 -k87 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) k 0,317 (.0125) k 0,25 (.010) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) plug engaging face dd configuration 10 a c e d b 3,05 (.120) 0,60 (.024) x l k 5,69 (.224) 2,84 (.112) 2,84 (.112) w f reader?s resource for contact cavity arrangements, see page 222. for p.c. hole patterns, see pages 266-268. for panel cutouts, see page 221. for hardware views (european), see page 227.
dimensions are shown in mm (inch) dimensions subject to change 77 d subminiature combo d ? straight pc tails ? european (sizes de-dd) part numbers shell size layout part number x 4.60 (.181) part number x 6.05 (.238) de 5w1 dem-5w1s-ol2-a197 dem-5w1s-ol4-a197 da 7w2 dam-7w2s-ol2-a197 dam-7w2s-ol4-a197 da 11w1 dam-11w1s-ol2-a197 dam-11w1s-ol4-a197 da 3w3 dam-3w3s-ol2-a197 dam-3w3s-ol4-a197 da 3wk3 dam-3wk3s-ol2-a197 dam-3wk3s-ol4-a197 db 5w5 dbm-5w5s-ol2-a197 dbm-5w5s-ol4-a197 db 9w4 dbm-9w4s-ol2-a197 dbm-9w4s-ol4-a197 db 13w3 dbm-13w3s-ol2-a197 dbm-13w3s-ol4-a197 db 17w2 dbm-17w2s-ol2-a197 dbm-17w2s-ol4-a197 db 21w1 dbm-21w1s-ol2-a197 dbm-21w1s-ol4-a197 dc 8w8 dcm-8w8s-ol2-a197 dcm-8w8s-ol4-a197 dc 13w6 dcm-13w6s-ol2-a197 dcm-13w6s-ol4-a197 dc 17w5 dcm-17w5s-ol2-a197 dcm-17w5s-ol4-a197 dc 21wa4 dcm-21wa4s-ol2-a197 dcm-21wa4s-ol4-a197 dc 25w3 dcm-25w3s-ol2-a197 dcm-25w3s-ol4-a197 dc 27w2 dcm-27w2s-ol2-a197 dcm-27w2s-ol4-a197 dd 24w7 ddm-24w7s-ol2-a197 ddm-24w7s-ol4-a197 dd 36w4 ddm-36w4s-ol2-a197 ddm-36w4s-ol4-a197 dd 43w2 ddm-43w2s-ol2-a197 ddm-43w2s-ol4-a197 dd 47w1 ddm-47w1s-ol2-a197 ddm-47w1s-ol4-a197 note: performance class 3 standard, for performance class 2 add -a 191. example: dem-5w1s-ol2- a191-a197 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) k 0,318 (.0125) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) receptacle engaging face dd configuration 10 a c e d b 3,05 (.120) l k 5,69 (.224) 2,84 (.112) reader?s resource for contact cavity arrangements, see page 223. for p.c. hole patterns, see pages 269-271. for panel cutouts, see page 221. for hardware views (european), see page 227. 0,60 (.024) x 2,84 (.112) w f
dimensions are shown in mm (inch) dimensions subject to change 78 d subminiature combo d ? solder cup (sizes de-dd) part numbers shell size layout through hole dual float mount clinch nut #4-40 unc de 5w1 dem5w1pk87 demy5w1pk87 deme5w1pk87 da 7w2 dam7w2pk87 damy7w2pk87 dame7w2pk87 da 11w1 dam11w1pk87 damy11w1pk87 dame11w1pk87 da 3w3 dam3w3pk87 damy3w3pk87 dame3w3pk87 da 3wk3 dam3wk3pk87 damy3wk3pk87 dame3wk3pk87 db 5w5 dbmp5w5pk87 dbmy5w5pk87 dbme5w5pk87 db 9w4 dbm9w4pk87 dbmy9w4pk87 dbme9w4pk87 db 13w3 dbm13w3pk87 dbmy13w3pk87 dbme13w3pk87 db 17w2 dbm17w2pk87 dbmy17w2pk87 dbme17w2pk87 db 21w1 dbm21w1pk87 dbmy21w1pk87 dbme21w1pk87 dc 8w8 dcm8w8pk87 dcmy8w8pk87 dcme8w8pk87 dc 13w6 dcm13w6pk87 dcmy13w6pk87 dcme13w6pk87 dc 17w5 dcm17w5pk87 dcmy17w5pk87 dcme17w5pk87 dc 21wa4 dcm21wa4pk87 dcmy21wa4pk87 dcme21wa4pk87 dc 25w3 dcm25w3pk87 dcmy25w3pk87 dcme25w3pk87 dc 27w2 dcm27w2pk87 dcmy27w2pk87 dcme27w2pk87 dd 24w7 ddm24w7pk87 ddmy24w7pk87 ddme24w7pk87 dd 36w4 ddm36w4pk87 ddmy36w4pk87 ddme36w4pk87 dd 43w2 ddm43w2pk87 ddmy43w2pk87 ddme43w2pk87 dd 47w1 ddm47w1pk87 ddmy47w1pk87 ddme47w1pk87 for contacts with 30 microinches gold substitute k127 for k87. example: dem5w1pk127 for m3 clinch nuts substitute x for e. example: demx5w1pk87 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) k 0,317 (.0125) k 0,25 (.010) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) plug engaging face 10 e d a b 3,05 (.120) c reader?s resource for contact cavity arrangements, see page 222. for panel cutouts, see page 221. for hardware views (standard), see page 226. l k 2,84 (.112) 5,69 (.224) dd configuration 10,72 (.422) max f w 2,84 (.112)
dimensions are shown in mm (inch) dimensions subject to change 79 d subminiature combo d ? solder cup (sizes de-dd) part numbers shell size layout through hole dual float mount clinch nut #4-40 unc de 5w1 dem5w1sa197 demy5w1sa197 deme5w1sa197 da 7w2 dam7w2sa197 damy7w2sa197 dame7w2sa197 da 11w1 dam11w1sa197 damy11w1sa197 dame11w1sa197 da 3w3 dam3w3sa197 damy3w3sa197 dame3w3sa197 da 3wk3 dam3wk3sa197 damy3wk3sa197 dame3wk3sa197 db 5w5 dbm5w5sa197 dbmy5w5sa197 dbme5w5sa197 db 9w4 dbm9w4sa197 dbmy9w4sa197 dbme9w4sa197 db 13w3 dbm13w3sa197 dbmy13w3sa197 dbme13w3sa197 db 17w2 dbm17w2sa197 dbmy17w2sa197 dbme17w2sa197 db 21w1 dbm21w1sa197 dbmy21w1sa197 dbme21w1sa197 dc 8w8 dcm8w8sa197 dcmy8w8sa197 dcme8w8sa197 dc 13w6 dcm13w6sa197 dcmy13w6sa197 dcme13w6sa197 dc 17w5 dcm17w5sa197 dcmy17w5sa197 dcme17w5sa197 dc 21wa4 dcm21wa4sa197 dcmy21wa4sa197 dcme21wa4sa197 dc 25w3 dcm25w3sa197 dcmy25w3sa197 dcme25w3sa197 dc 27w2 dcm27w2sa197 dcmy27w2sa197 dcme27w2sa197 dd 24w7 ddm24w7sa197 ddmy24w7sa197 ddme24w7sa197 dd 36w4 ddm36w4sa197 ddmy36w4sa197 ddme36w4sa197 dd 43w2 ddm43w2sa197 ddmy43w2sa197 ddme43w2sa197 dd 47w1 ddm47w1sa197 ddmy47w1sa197 ddme47w1sa197 for contacts with 30 microinches gold substitute k126 for a197. example: dem5w1sk126 for m3 clinch nuts substitute x for e. example: demx5w1sa197 keyed. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) k 0,318 (.0125) l 0,25 (.010) de 30,81 (1.123) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) receptacle engaging face a c b e d 3,05 (.120) 10 9,91 (.390) max reader?s resource for contact cavity arrangements, see page 223. for panel cutouts, see page 221. for hardware views (standard), see page 226. k l 5,69 (.224) 2,84 (.112) dd configuration 2,84 (.112) f w
dimensions are shown in mm (inch) dimensions subject to change 80 d subminiature combo d ? crimp cable connectors without contacts (sizes da-dd) plug reader?s resource for contact cavity arrangements, see page 222. for panel cutouts, see page 221. part numbers shell size layout part number da 7w2 daa7w2pk87f0 da 11w1 daa11w1pk87f0 da 3w3 daa3w3pk87f0 db 5w5 dba5w5pk87f0 db 9w4 dba9w4pk87f0 db 13w3 dba13w3pk87f0 db 17w2 dba17w2pk87f0 db 21w1 dba21w1pk87f0 dc 8w8 dca8w8pk87f0 dc 21wa4 dca21wa4pk87f0 dc 25w3 dca25w3pk87f0 dd 24w7 dda24w7pk87f0 dd 36w4 dda36w4pk87f0 note: for crimp (size 20) contacts and tooling, see pages 83 & 275. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,368 (.0145) w 0,41 (.016) k 0,317 (.0125) k 0,25 (.010) l 0,25 (.010) de 30,81 (1.213) 16,92 (.666) 24,99 (.984) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) da 39,14 (1.541) 25,25 (.994) 33,32 (1.312) 8,36 (.329) 12,55 (.494) 10,72 (.422) 6,693 (.2635) ? 1,206 (.0475) ? 0,76 (.030) db 53,04 (2.088) 38,96 (1.534) 47,04 (1.852) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dc 69,32 (2.729) 55,42 (2.182) 63,50 (2.500) 8,36 (.329) 12,55 (.494) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) dd 66,93 (2.635) 52,81 (2.079) 61,11 (2.406) 11,07 (.436) 15,37 (.605) 10,82 (.426) ? 6,84 (.269) ? 1,52 (.060) 0,99 (.039) engaging face l k 10,92 (.430) max a c b e d 10
dimensions are shown in mm (inch) dimensions subject to change 81 d subminiature combo d ? crimp cable connectors without contacts (sizes da-dd) receptacle reader?s resource for contact cavity arrangements, see page 223. for panel cutouts, see page 221. part numbers shell size layout part number da 7w2 daa7w2sa197f0 da 11w1 daa11w1sa197f0 da 3w3 daa3w3sa197f0 db 5w5 dba5w5sa197f0 db 9w4 dba9w4sa197f0 db 13w3 dba13w3sa197f0 db 17w2 dba17w2sa197f0 db 21w1 dba21w1sa197f0 dc 8w8 dca8w8sa197f0 dc 21wa4 dca21wa4sa197f0 dd 24w7 dda24w7sa197f0 dd 36w4 dda36w4sa197f0 note: for crimp (size 20) contacts and tooling, see pages 83 & 275. dimensions shell size a 0,38 (.015) b 0,13 (.005) c 0,13 (.005) d 0,13 (.005) e 0,38 (.015) f 0,25 (.010) w 0,38 (.015) k 0,317 (.0125) l 0,25 (.010) de 30,81 (1.213) 16,33 (.643) 24,99 (.984) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) da 39,14 (1.541) 24,66 (.971) 33,32 (1.312) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) db 53,04 (2.088) 38,38 (1.511) 47,04 (1.852) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dc 69,32 (2.729) 54,84 (2.159) 63,50 (2.500) 7,90 (.311) 12,55 (.494) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) dd 66,93 (2.635) 52,42 (2.064) 61,11 (2.406) 10,74 (.423) 15,37 (.605) 10,90 (.429) 6,94 (.273) 1,206 (.0475) 0,76 (.030) engaging face l k 10,92 (.430) max a c b e d 10
dimensions are shown in mm (inch) dimensions subject to change 82 d subminiature combo d ? shield cans x cable ferrule x a ferrule part number crimp tool part number crimp tool position 4,8 - 5,5 6,25 (.246) 304-8810-000 d115433-1 b 5,5 - 6,2 6,25 (.246) 304-8810-000 d115433-1 a 6,2 - 7,2 8,20 (.323) 304-8811-000 d115433-2 b 7,2 - 8,2 8,20 (.323) 304-8811-000 d115433-2 a 8,2 - 9,5 11,50 (.452) 304-8812-000 d115433-3 b 9,5 - 11,1 11,50 (.452) 304-8813-000 d115433-3 a ferrule cable ferrule wire trim dimensions 11,25(.443) a 11,10(.437) 10,00(.394) 50,00 (1.969) crimp tool positions 10,10 (.398) 10,00 (.394) order 1 top can, 1 bottom can, 1 ferrule per connector. materials and finishes shield can and ferrule material: steel finish: tin part numbers top can (b size): 348-8946-000 bottom can (b size): 348-8945-000 note: for other available can sizes, consult factory for details.
dimensions are shown in mm (inch) dimensions subject to change 83 loose contacts stamped contacts with insulation support are supplied loose for use with hand crimp tooling. two sizes are available to accommodate wire ranges 20 - 26 awg. d subminiature combo d ? crimp (size 20) contacts tooling hand crimp tool description part number cct-d*a-1 995-2000-000 extraction tool description part number wire size ciet-d*a-20-24 980-0008-135 20-24 awg ciet-d*a-24-26 980-0008-136 24-26 awg for semi-automatic tooling, see page 275. cct-d*a-1 pin contact socket contact finish 30 inches gold over nickel for tooling, see this page. part number pin contact 24-26 awg 20-24 awg 030-2487-017 030-2487-016 part number socket contact 24-26 awg 20-24 awg 030-2488-017 030-2488-016 reeled contacts (5,000 pieces per reel) stamped contacts with insulation support are supplied on reels of 5,000 for use with semi- automatic strip and crimp machines. two sizes are available to accommodate wire ranges 20 - 26 awg. pin contacts socket contacts finish gold over nickel 30 inches gold over nickel for semi-automatic tooling, see page 275. part number pin contact 24-26 awg 20-24 awg 980-2000-925 980-2000-924 980-2000-946 980-2000-945 part number socket contact 24-26 awg 20-24 awg 980-2000-926 980-2000-923 980-2000-944 980-2000-943 pin contacts socket contacts
dimensions are shown in mm (inch) dimensions subject to change 84 d subminiature combo d ? cable (size 8) loose contacts ? coaxial 75 ohm stamped crimp/crimp recommended wire trim dimensions kit (body, ferrule, center contact) stamped crimp/crimp kit gold over ni kit 30 in. gold over ni kit 50 in. gold over ni rg cable number plug d130322-2 d130322-1 d130322-6 179/u receptacle d130344-1 d130344 d130344-2 179/u tooling for stamped crimp/crimp description crimping tool tool number stamped center conductor hand crimp, ??b?? crimp cctp-750hm semi-automatic crimper abt-607 (leased) stamped outer conductor hand tool, hex crimp cctp-dm pneumatic hex crimp 995-2000-094 for semi-automatic tooling, see page 275. loose components for high volume (3 pieces ? body, ferrule, center contact) stamped crimp/crimp body ferrule center contact gold over ni 10,000 reel center contact 30 in. gold over ni 10,000 reel plug 249-2272-000 304-0444-000 110238-1015 110238-1012 receptacle 249-2271-000 304-0444-000 110238-1014 110238-1013
dimensions are shown in mm (inch) dimensions subject to change 85 d subminiature combo d ? cable (size 8) loose contacts ? coaxial 75 ohm ? 90 90 crimp braid/solder center contact part number part number part number gold over ni 30 in. gold over ni 50 in. gold over ni plug d130357-1 d130357 d130357-4 receptacle d130356-1 d130356 d130356-3 plug receptacle tooling for 90 crimp braid description part number hand tool: 995-0001-761 die set: 995-2000-110 17,30 (.680) ref 0,16 (.006) ref 4,79(.189) ref 17,53 (.690) ref 5,10 (.200) ref note: ferrule not shown. note: ferrule not shown.
dimensions are shown in mm (inch) dimensions subject to change 86 d subminiature combo d ? cable (size 8) loose contacts ? coaxial 50 ohm ? straight straight crimp braid part number gold over nickel part number 50 in. gold over copper a max. b max. d min. rg cable number old new plug dm53740 dm53740-17 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/u 178b/u plug dm53740-1 dm53740-15 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/u 188/u 179b/u 316b/u plug dm53740-35 ? 18,80 (.739) 24,00 (.945) 1,70 (.067) ? rd316 plug dm53740-3 dm53740-16 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/u 180b/u plug dm53740-5 dm53740-18 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/u 58b/u receptacle dm53742 dm53742-18 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/u 178b/u receptacle dm53742-1 dm53742-16 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/u 188/u 179b/u 316b/u receptacle dm53742-36 ? 18,80 (.739) 24,00 (.945) 1,70 (.067) ? rd316 receptacle dm53742-3 dm53742-17 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/u 180b/u receptacle dm53742-5 dm53742-19 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/u 58b/u for crimp tooling, see page 89. straight solder braid part number gold over nickel part number 50 in. gold over copper a max. b max. d min. rg cable number old new plug dm53740-5008 dm53740-5105 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/u 178b/u plug dm53740-5001 dm53740-5099 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/u 188/u 179b/u 316b/u plug dm53740-5145 ? 18,80 (.739) 24,00 (.945) 1,70 (.067) ? rd316 plug dm53740-5002 dm53740-5104 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/u 180b/u plug dm53740-5005 dm53740-5101 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/u 58/u plug (short type) dm53740-5000 dm53740-5100 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/u 178b/u receptacle dm53742-5006 dm53742-5092 18,80 (.739) 24,00 (.945) 1,00 (.040) 196/u 178b/u receptacle dm53742-5001 dm53742-5089 18,80 (.739) 24,00 (.945) 1,70 (.067) 187/u 188/u 179b/u 316b/u receptacle dm53742-5126 ? 18,80 (.739) 24,00 (.945) 1,70 (.067) ? rd316 receptacle dm53742-5002 dm53742-5091 21,50 (.847) 26,34 (1.037) 2,79 (.110) 195/u 180b/u receptacle dm53742-5004 dm53742-5086 21,50 (.847) 26,34 (1.037) 3,18 (.125) 58/u 58/u receptacle (short type) dm53742-5000 dm53742-5085 17,00 (.670) 22,20 (.874) 1,14 (.045) 196/u 178b/u receptacle plug plug receptacle note: dimensions include outer sleeve.
dimensions are shown in mm (inch) dimensions subject to change 87 d subminiature combo d ? cable (size 8) loose contacts ? coaxial 50 ohm ? 90 90 crimp braid note: dimensions include outer sleeve. plug receptacle part number gold over nickel part number 50 in. gold over copper a max. b max. c d 0,13 (.005) rg cable number old new plug dm53741 dm53741-12 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,14 (.045) 196/u 178b/u plug dm53741-1 dm53741-11 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,83 (.072) 187/u 188/u 179b/u 316b/u plug dm53741-3 dm53741-10 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/u 180b/u plug dm53741-4 dm53741-13 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/u 58b/u receptacle dm53743-2 dm53743-18 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,14 (.045) 196/u 178b/u receptacle dm53743-3 dm53743-16 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,83 (.072) 187/u 188/u 179b/u 316b/u receptacle dm53743-5 dm53743-17 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/u 180b/u receptacle dm53743-6 dm53743-19 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/u 58b/u for crimp tooling, see page 89. 90 solder braid plug receptacle part number gold over nickel part number 50 in. gold over copper a max. b max. c d min. rg cable number old new plug dm53741-5000 dm53741-5059 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,00 (.040) 196/u 178b/u plug dm53741-5001 dm53741-5062 13,46 (.530) 18,92 (.745) 15,10 (.594) 1,70 (.067) 187/u 188/u 179b/u 316b/u plug dm53741-5003 dm53741-5063 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/u 180b/u plug dm53741-5004 dm53741-5060 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/u 58/u receptacle dm53743-5000 dm53743-5073 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,00 (.040) 196/u 178b/u receptacle dm53743-5001 dm53743-5076 13,46 (.530) 18,92 (.745) 15,09 (.594) 1,70 (.067) 187/u 188/u 179b/u 316b/u receptacle dm53743-5003 dm53743-5077 13,46 (.530) 18,92 (.745) 16,00 (.630) 2,79 (.110) 195/u 180b/u receptacle dm53743-5004 dm53743-5074 13,46 (.530) 18,92 (.745) 16,00 (.630) 3,18 (.125) 58/u 58b/u
dimensions are shown in mm (inch) dimensions subject to change 88 d subminiature combo d ? insertion/extraction instructions for coaxial, high power and high voltage contacts insertion tool no insertion tool is required. the contact is easily snapped in from the rear of the connector manually. extraction tool the cet-c6b-2 tool extracts all coaxial, high power and high voltage contacts (plug and receptacle). description part number cet-c6b-2 070064-0002 operating instructions to extract the coaxial contact, hold the tool by the body and insert the tip into the front of the contact cavity until it bottoms and closes the coaxial retaining ring. holding the body in this position cet-c6b-2 securely enough to keep coaxial retaining ring closed, push the plunger; contact will be pushed out of the rear of the assembly. insertion instructions
dimensions are shown in mm (inch) dimensions subject to change 89 d subminiature combo d ? coaxial assembly instructions rg cable number straight coaxial 90 coaxial n 0,25 (.010) o 0,25 (.010) p 0,25 (.010) n 0,25 (.010) o 0,25 (.010) p 0,25 (.010) 196/u, 178b/u, 187/u, 188/u, 179b/u, 316b/u 7,92 (.312) 6,35 (.250) 1,98 (.078) 9,52 (.375) 5,94 (.234) 1,57 (.062) 195/u, 180b/u, 58/u, 58b/u 9,52 (.375) 7,92 (.312) 1,98 (.078) 10,69 (.422) 7,92 (.312) 2,39 (.094) coaxial cable trim dimensions rg cable number tool part number description closure 196/u, 178b/u 070051-0000 cct-dm c 187/u, 179b/u, 188/u, 316b/u 070051-0000 cct-dm b 195/u, 180b/u, 58/u, 58b/u 070051-0000 cct-dm a crimp tooling straight and 90 coaxial assembly step 1: slide the outer ring over the cable jacket. trim the cable as specified in the table of coaxial cable trim dimensions (see this page). insert the cable dielectric and center conductor into the inside diameter of the inner sleeve. then solder the center conductor to the coaxial center contact. straight and 90 coaxial assembly step 2: slide the outer ring forward until it is flush with the coaxial shell containing the braid between the outer ring and the inner sleeve. for solder type coaxes, soft solder the outer ring to the assembly through the cross-drilled solder hold. for crimp type coaxes, crimp with the appropriate tool in the area defined. straight coaxial 90 coaxial straight coaxial 90 coaxial hand tool with integral die set for all coaxial straight crimp braid.
dimensions are shown in mm (inch) dimensions subject to change 90 20,93 - 20,42 (.824 - .804) a b d subminiature combo d ? cable (size 8) loose contacts ? high power ? solder plug part number gold over nickel part number 50 in. gold over ni current rating wire size dm53745-1 dm53745-28 40 a 8 awg dm53745-7 dm53745-27 20 a 12 awg dm53745-8 dm53745-25 10 a 16 awg receptacle part number gold over nickel part number 50 in. gold over ni current rating wire size dm53744-1 dm53744-21 40 a 8 awg dm53744-6 dm53744-25 20 a 12 awg dm53744-7 dm53744-24 10 a 16 awg plug recommended wire trim length part number gold over nickel part number 30 in. gold over ni part number 50 in. gold over ni x a max. x b max. current rating wire size dm130338-4 dm130338 dm130338-1 4,60 (.181) 5,84 (.230) 40 a 8 awg dm130339-4 dm130339 dm130339-1 2,54 (.100) 5,54 (.218) 20 a 12 awg dm130340-4 dm130340 dm130340-1 1,07 (.067) 2,59 (.102) 10 a 16 awg receptacle part number gold over nickel part number 30 in. gold over ni part number 50 in. gold over ni x a max. x b max. current rating wire size dm130341-4 dm130341 dm130341-1 4,60 (.181) 5,84 (.230) 40 a 8 awg dm130342-4 dm130342 dm130342-1 2,54 (.100) 5,54 (.218) 20 a 12 awg dm130343-4 dm130343 dm130343-1 1,07 (.067) 2,59 (.102) 10 a 16 awg high power crimp tooling crimp tool/locator wire size crimp tool tool setting number locator 8 awg m300-bt 6 tp968 10 awg m300-bt 5 tp968 12/14 awg m300-bt 1 tp968 16 awg ft-8 6 th554 18 awg ft-8 5 th554 cable (size 8) loose contacts ? high power ? crimp m300-bt recommended wire trim length
dimensions are shown in mm (inch) dimensions subject to change 91 ring, retainer insulator 17,70 (.697) ref receptacle for tooling, see page 88. 18,64 (.734) ref ring, retaining insulator d subminiature combo d ? cable (size 8) loose contacts ? high voltage ? straight part number part number wire size gold over ni 50 in. gold dm51157 dm51157-8 20 awg part number part number wire size gold over ni 50 in. gold dm51157-5000 dm51157-5005 20 awg ring, retaining insulator 17,70 (.697) ref for tooling, see page 88. for tooling, see page 88. plug receptacle 19,41(.764) ref ring, retaining insulator part number part number wire size gold over ni 50 in. gold dm51155 dm51155-7 20 awg for tooling, see page 88. cable (size 8) loose contacts ? high voltage ? 90 plug part number part number wire size gold over ni 50 in. gold dm51155-5000 dm51155-5004 20 awg
dimensions are shown in mm (inch) dimensions subject to change 92 d subminiature combo d ? pcb (size 8) loose contacts ? coaxial 75 ohm ? straight plug receptacle pcb (size 8) loose contacts ? coaxial 75 ohm ? 90 plug receptacle 17,78 (.700) 0,51 (.020) 5,08 (.200) 0,25 (.010) 4,19 (.165) 18,00 (.708) 0,61 (.024) 5,08 (.200) 0,25 (.010) 4,19 (.165) 20,32 (.800) 3,81 (.150) 10,26 (.404) 0,51 (.020) 5,08 (.200) 20,32 (.800) 3,81 (.150) 10,23 (.403) 0,61 (.024) 5,08 (.200) description part number plug dm130358-2 description part number receptacle dm130346-2 description part number plug dm130352-2 description part number receptacle dm130321-3
dimensions are shown in mm (inch) dimensions subject to change 93 d subminiature combo d ? pcb (size 8) loose contacts ? high power ? straight pin socket pcb (size 8) loose contacts ? high power ?90 pin shell size part number a 0,25 (.010) b 0,25 (.010) x c 0,13 (.005) de, da, db, dc dm53745-104 10,62 (.418) 26,64 (1.049) 3,18 (.125) dd dm53745-107 13,41 (.528) 26,64 (1.049) 3,18 (.125) european footprint de, da, db, dc, dd dm53745-120 18,06 (.711) 11,00 (.433) 2,90 (.114) 18,23 0,25 (.718 .010) 3,18 0,13 (.125 .005) 18,19 0,25 (.716 .010) 3,18 0,13 (.125 .005) c a b c b a socket shell size part number a 0,25 (.010) b 0,25 (.010) x c 0,13 (.005) de, da, db, dc dm53744-92 13,41 (.528) 26,52 (1.044) 3,18 (.125) dd dm53744-95 10,62 (.418) 26,52 (1.044) 3,18 (.125) european footprint de, da, db, dc, dd dm53744-107 11,00 (.433) 17,93 (.706) 2,90 (.114) description part number pin dm53745-110 description part number socket dm53744-98
dimensions are shown in mm (inch) dimensions subject to change 94 d subminiature combo d ? pcb (size 8) loose contacts ? high voltage ? straight plug part number gold over ni part number 50 in. gold dm51157-13 dm51157-14 15,95 (.628) ref 5,94 - 5,44 (.234 - .214) 1,52 - 1,27 (.060 - .050) 3,68 - 3,53 (.145 -.139) 1,65 - 1,50 (.065 - .059) 5,72 - 5,33 (.225 - .210) 4,88 (.192) max contact, pin insulator ring, retaining 16,76 (.660) ref 6,48 - 6,22 (.255 - .245) 0,25 - 0,00 (.010 - .000) 1,65 - 1,50 (.065 - .059) 5,72 - 5,33 (.225 - .210) 4,88 (.192) max contact, skt insulator ring, retaining receptacle part number gold over ni part number 50 in. gold dm51155-12 dm51155-13
dimensions are shown in mm (inch) dimensions subject to change 95 d subminiature combo d ? pcb guide pin and socket installs into any combo d, size 8 cavity. this guide pin and socket system is ideal for blind mate applications where space is limited. pcb guide pin part number material finish dm53745-126 copper alloy tin 29,21 (1.150) ref 3,68 - 3,43 (.145 - .135) 5,66 - 5,41 (.223 - .213) ring, retaining 3,25 - 3,10 (.128 - .122) 11,43 (.450) ref pcb guide socket part number material finish 248-2967-000 copper alloy tin 4,06 (.160) 16,28 (.641) ref connector rear insulator ref

▲Up To Search▲

Price & Availability of DCMZXXXXXX197

	To Download DCMZXXXXXX197 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .